01 inners and outers, LBJ's

[01thunder]

i got under the truck and the TRE's are easily movable by hand. obviously they need to be replaced. perhaps this is what is causing the noise i have been hearing and feeling.
anyway, there are a lot of write ups on this but i didn't see part numbers nor where to get quality parts, besides going to toyota. i know that there are choices as well.
where have you guys bought these parts including LBJ's, and what options are there? i need to address this asap before something falls off!

 

[BigSlim]

Here is the page with all the part numbers including the part number for the 4 LBJ bolts that you will need to replace on each side too.

Page: http://www.toyota-4runner.org/3rd-g...nner-tie-rods-ball-joints-wheel-bearings.html

Might as well go ahead and replace the two tie rod boots too while you are under there.

 

[01thunder]

where is the page?

 

[BrianSD_42]

I just researched this the other day. A single search using the Google bar or my Sig will pull up plenty of how to threads.

 

[01thunder]

$516 is quite a chunk for these parts. what are napa's prices like? same? less? better, same or less quality part?

 

[BrianSD_42]

I priced it out around $340 when you buy the parts from Camelback Toyota online parts dept. google them.

 

[01thunder]

340? the inners are 122 each. balls are 86 and 78 each, and outers are 47 each. that's 502. which parts are 340?

 

[01thunder]

are all these parts greaseable?

 

[TheeMikeB]

x2 on Camelback Toyota Parts. I saved a bundle there and free shipping, dont' remember what the total came up to but I did uppers/lowers/inner/outer TRE.

Actually the only thing I bought from Napa was the inner TRE, all the rest was OEM. It is what it is and they cost what they cost, but it will get you another 100K miles easy. It's a great piece of mind too knowing they are done and done right.