1995 4runner AT breather location

[pt1334]

Hi, Im new to the forum, I just bought a 4x2 1995 4runner and i have a question. Well, i might have many more later on. But Last night i drove the car around the block. Once i got home I noticed AT fluid pouring out all the way around the AT Pan (seal). I was wondering if it could be the Vent/breather clotted. I read some where that if the breather is clotted, pressure bluids up and pushes the fluid through the seals. Does anyone know where the breather is located? Im going to remove the pan tomorrow and put a new seal. Is there an order the bolts need to me remove? Thanks

 

[Clone of the Mean]

Mine occasionally will pop the dipstick out of the tube by an inch or so. Never seen it puke like your talking about. Well, once I did, but my kid overfilled the tranny by 4 qts……

You may want to check your fluid level.

 

[pt1334]

AT leak

Thanks, I'll check the level later when I get home. Do you know how many quarts does it take?

 

[pt1334]

AT leak

So for the 2nd generation, the vent or breather for the AT is the Dip stick?

 

[541joseph]

No there should be a breather at the top of the bell housing I think