2004 Propeller Shaft Bolt Torque & Brake Fluid Replacement

Border411

New member
I need to do some maintenance on my 2004 4runner as i am getting near 60k miles. What torque should the propeller shaft bolt be torqued to?

Also, when should the brake fluid be replaced?
 
Register to hide this ad
DOT3 brake fluid absorbs moisture. Most recommend replacing/flushing brake fluid every other year, if not every year.
 
Uneek said:
DOT3 brake fluid absorbs moisture. Most recommend replacing/flushing brake fluid every other year, if not every year.


I go every 36K with my brake fluid flush.
The darker the fluid, the worse it is.
 
Thanks. It seems like my fluid is still pretty clean, but I will change it when I get a chance. Any idea how much I should buy to flush the whole system?
 
Border411 said:
Thanks. It seems like my fluid is still pretty clean, but I will change it when I get a chance. Any idea how much I should buy to flush the whole system?

If you buy from a place like Kragen that lets you return, I would just over buy and get a 5-6 bottles. Rather than get stuck in the middle of a flush and be short on fluid. Brake fluid is ok to keep around as long the seal has not been broken/opened. Once it's open, it's about as good as the brake fluid that's already in the 4Runner since it will absorb moisture as well.
 

Members online

Forum statistics

Threads
278,312
Messages
3,554,089
Members
248,016
Latest member
Advally Service

Trending content

Back
Top