Howdy all, I really like my 4 runner, but it has a problem. The 4 Runner was not built for a tall person with long legs(36 inch inseam). I went out look to trade in my 4Runner on something with more leg room. Most of the vehicles just did not compare, they had leg room ,but that was it.
I pulled the seat to find out what it would take to make this seat work for me.It starts with some 2"x3/8 x20" steel,Just a little over kill.

http://i326.photobucket.com/albums/...s/2014-01/IMG_20140116_115221_zpsbwhxpygf.jpg
Pull the seat, strap it to the work bench, drill out the rivets that hold the legs on(do not grind do to small fire)<a href="http://s326.photobucket.com/user/kowboy66/media/Mobile%20Uploads/2014-01/IMG_20140116_115716_zpswzsxt7yw.jpg.html" target="_blank"><img src="http://i326.photobucket.com/albums/k431/kowboy66/Mobile%20Uploads/2014-01/IMG_20140116_115716_zpswzsxt7yw.jpg" border="0" alt=" photo IMG_20140116_115716_zpswzsxt7yw.jpg"/></a>


I lined up the legs , drilled holes, attached with 1/4 20 grade 8 bolts with nylock nuts. I put them in the 4 runner for test fit.
Once it was tested, i pulled them apart for paint

Then I mounted them back on the seat


I put it back in the 4 Runner, it gives me 4 more inch's of leg room, and it sits 3/4 of an inch higher(I really did not need that) it still moves forward for the shortest person.
I pulled the seat to find out what it would take to make this seat work for me.It starts with some 2"x3/8 x20" steel,Just a little over kill.

http://i326.photobucket.com/albums/...s/2014-01/IMG_20140116_115221_zpsbwhxpygf.jpg
Pull the seat, strap it to the work bench, drill out the rivets that hold the legs on(do not grind do to small fire)<a href="http://s326.photobucket.com/user/kowboy66/media/Mobile%20Uploads/2014-01/IMG_20140116_115716_zpswzsxt7yw.jpg.html" target="_blank"><img src="http://i326.photobucket.com/albums/k431/kowboy66/Mobile%20Uploads/2014-01/IMG_20140116_115716_zpswzsxt7yw.jpg" border="0" alt=" photo IMG_20140116_115716_zpswzsxt7yw.jpg"/></a>


I lined up the legs , drilled holes, attached with 1/4 20 grade 8 bolts with nylock nuts. I put them in the 4 runner for test fit.

Once it was tested, i pulled them apart for paint


Then I mounted them back on the seat


I put it back in the 4 Runner, it gives me 4 more inch's of leg room, and it sits 3/4 of an inch higher(I really did not need that) it still moves forward for the shortest person.
Last edited:

