Midmo_Tundra
New member
70mm, but it all depends on what shroud you use.
2013 Trail 4Runner MiniH1 Retrofit
- Thread starter Midmo_Tundra
- Start date
70mm, but it all depends on what shroud you use.
4everunner
Member
"Cooked" mine today...
4everunner
Member
Thank you!
Output is amazing!!! It is Gatling Gun 2.0, but those are not made for BI-XENON MORIMOTO MINI STAGE III KIT (D2S), I had to send it to fit. The reason why I went with GG 2.0 is because I thought I’m getting square ones
But it is fine, it just took me alittle longer.
Also, this kit requires bigger hole in reflector. I don t think you have to cut anything with BI-XENON MORIMOTO MINI STAGE III KIT (H1).
Output is amazing!!! It is Gatling Gun 2.0, but those are not made for BI-XENON MORIMOTO MINI STAGE III KIT (D2S), I had to send it to fit. The reason why I went with GG 2.0 is because I thought I’m getting square ones
But it is fine, it just took me alittle longer.
Also, this kit requires bigger hole in reflector. I don t think you have to cut anything with BI-XENON MORIMOTO MINI STAGE III KIT (H1).
Last edited:
Thank you!
Output is amazing!!! It is Gatling Gun 2.0, but those are not made for BI-XENON MORIMOTO MINI STAGE III KIT (D2S), I had to send it to fit. The reason why I went with GG 2.0 is because I thought I’m getting square ones
But it is fine, it just took me alittle longer.
Also, this kit requires bigger hole in reflector. I don t think you have to cut anything with BI-XENON MORIMOTO MINI STAGE III KIT (H1).
I've been eyeing the D2S Stage III kit with the x lens (square).
4everunner
Member
I never saw square projectors in action, I think its kind of new stuff.
One downside for D2S is the bulb replacement (at least for me). I think its gonna be pain in the rear.
One downside for D2S is the bulb replacement (at least for me). I think its gonna be pain in the rear.
4everunner
Member
BEFORE:
AFTER:
AFTER:
Snow-Jet-MK5
New member
looks good! the cut off on mini h1 are pretty crisp until they get to the ends and they start to bow and wash out. i run a quad setup with fxr projectors as my primary and the mini h1 as a dedicated high beam (removed the shield) since i didn't like how they curved. plus it is extremely hard to align 4 projectors.
