2nd Gen T4R Picture Gallery
- Thread starter RuSty420
- Start date
mhamlettster
New member
1992 sr5
I can't remember if I posted mine up, but everything has been gone through in the time it was down. Still in the break-in process and working out the kinks.
1992 SR5 4X4, 5 spd, 3VZ-E Bored .020 over, ground new cams, port and polished, oversized valves, new pistons rings, rods, polisjed crank, new sensors and wiring all the way around. DT headers, some flowmaster exhaust components, and high-flow cat, Thrush Muffler, TRD tip from a tundra(louder than I like when it was all said and done) CAI. 3 row aluminum radiator, taurus fan, relayed in series to run two speeds. Never heard the second speed kick in yet. As it sits so far, I have 268 miles into the motor Break-in and working out some little kinks and tuning here and there.
Replaces the drive flanges with manual aisin hubs that I refurbished.
1.5" BJ spacers and torqued torsion bars, 4" coils in the rear.
I'm sure I'm leaving some stuff out, and My pictures aren't the best.
I can't remember if I posted mine up, but everything has been gone through in the time it was down. Still in the break-in process and working out the kinks.
1992 SR5 4X4, 5 spd, 3VZ-E Bored .020 over, ground new cams, port and polished, oversized valves, new pistons rings, rods, polisjed crank, new sensors and wiring all the way around. DT headers, some flowmaster exhaust components, and high-flow cat, Thrush Muffler, TRD tip from a tundra(louder than I like when it was all said and done) CAI. 3 row aluminum radiator, taurus fan, relayed in series to run two speeds. Never heard the second speed kick in yet. As it sits so far, I have 268 miles into the motor Break-in and working out some little kinks and tuning here and there.
Replaces the drive flanges with manual aisin hubs that I refurbished.
1.5" BJ spacers and torqued torsion bars, 4" coils in the rear.
I'm sure I'm leaving some stuff out, and My pictures aren't the best.
Attachments
-
524574_10152071312549532_962751273_n (1).jpg -
564432_10152054517419532_12680882_n.jpg -
554724_10152068943869532_948624695_n.jpg -
601526_10152022629449532_683144582_n.jpg -
995866_10152022645974532_2021212846_n.jpg -
1378708_10151991370564532_244280112_n.jpg -
1451619_10152022646289532_1165132131_n.jpg -
1470365_10152071312384532_1882137950_n (2).jpg
Last edited:
gigerunner
New member
I think those are Tactical Armor Group bumpers. (His truck is on there web site, so I'm pretty sure) Price looks great from what I see - less than 1400 for front and back?
DeclansDaddy
New member
View attachment 105221
Here's my new project. Picked her up for $1800.00. So far I put in a radio and speakers. New brakes and calipers, flowmaster, and other little odds and ends. Still needs a couple CV Axles, thermostat (or temp gauge, gauge barely moves off the C), valve cover gaskets, remove the hideous stripes on the side. Future plans are some bumpers/winch, 4 inch lift, 33's, roof basket, tint the glass, maybe some sliders(not many rocks to climb here on the east coast but would like to take it out west and ride some trails). Also I've been keeping my eyes out for a wrecked 3rd gen that I could use as a 3.4 swap donor so we'll see how that pans out but for now the 3.slow is hanging in there. Once I get really going ill probably start a build thread and all of your opinions will be appreciated whether good or bad.
Here's my new project. Picked her up for $1800.00. So far I put in a radio and speakers. New brakes and calipers, flowmaster, and other little odds and ends. Still needs a couple CV Axles, thermostat (or temp gauge, gauge barely moves off the C), valve cover gaskets, remove the hideous stripes on the side. Future plans are some bumpers/winch, 4 inch lift, 33's, roof basket, tint the glass, maybe some sliders(not many rocks to climb here on the east coast but would like to take it out west and ride some trails). Also I've been keeping my eyes out for a wrecked 3rd gen that I could use as a 3.4 swap donor so we'll see how that pans out but for now the 3.slow is hanging in there. Once I get really going ill probably start a build thread and all of your opinions will be appreciated whether good or bad.
Attachments
DeclansDaddy
New member
Why is my pic upside down??
Here's mine that I thought I'd add to the collection before it's gone. I'm actually selling it. I'd love to keep it but as much as I drive I need something a little more efficient as a daily. Hopefully whoever takes it uses it the way it's intended.
Attachments
Chuckles89
New member
Too bad you are selling it. It looks very clean!
Yeah I'd love to keep it and build it up for when I take trips with friends out to the trails or dunes. But being a daily driver in LA of all places, it isn't really ideal.
dirtrider38
New member
![IMG_20131222_161503_894[2].jpg](/data/attachments/83/83064-28da7c23cec6f92aabefb5b323b9ce6a.jpg?hash=OuNP5REOpX)
![IMG_20131206_163418_447[1].jpg](/data/attachments/83/83076-7d860784487d51cf02115bede26c3042.jpg?hash=hwG6j1P-Cb)
![IMG_20131222_184923[1].jpg](/data/attachments/83/83090-e7ef46a7ac22a857a5947bfad0c3ba22.jpg?hash=K7ETG7YtnI)
mikebontoft
New member
I need to do something to my truck. what do I do? I have 4 other cars that require my attention.
KidVermicious
New member
4BT swap.
mikebontoft
New member
ugh I've already got too many engine swaps going on.
I know. I've been meaning to make a tire carrier for the hitch (bumper eventually... but this should hold me over for a bit.
Sharpie330
New member
ralatkins
Member
Nice first post
Sharpie330
New member
Hehe I have had my truck for years, and just discovered this forum. Seems like there are a lot more people who share my love for toyotas. Pretty awesome.
Those pics were taken this weekend up near Bass lake in CA, place called Fresno Dome. The snow was 3' deep in some spots, ended up being a fun trip.
Those pics were taken this weekend up near Bass lake in CA, place called Fresno Dome. The snow was 3' deep in some spots, ended up being a fun trip.
Last edited:
dirtrider38
New member
Thanks! It's super bright at night!
