3D printing ideas

[MTD]

Hey you making those cupholders for a 98'?

That was someone else on here. I guess they were working on fixing the printer.

 

[foxrider56]

Are yous still making things?
I really want to run a boost gauge and afr gauge in the sunglasses holder thing, basically just making a double gauge pod holder where the pop down sunglasses holder is

 

[MTD]

I am actually working on that now. the thing I don't like is that the AFR I want has bulky cords so it may be hard to route there and also it will eliminate my super neat overhead switch panel I printed :/ what may happen is either a full pillar pod or a dash mounted pod that mimicks the old 4runners clinometers

 

[dozerfrelich]

Finally got around to uploading pics of my ultra gauge hold and a new switch panel that fits under the radio and bolts into the holder. If you would like one PM and we'll work something out. Not sure on a price yet. If any one has more suggestions on other stuff to make let me know thanks!
sorry for the over-large pics i dont know how to make them smaller.

 

[thatoneguygeoff]

I'm interested in seeing what you came up for your tablet mount. I'd like to mount my Ipad mini on the dash somewhere.

 

[dozerfrelich]

If i can find a person here with a Ipad mini i will

 

[thatoneguygeoff]

Sweet thanks!

 

[dozerfrelich]

Found a Ipad mini so i will start desiging one tomorrow and hopefully have a pro to type by tomorrow afternoon ish

 

[thatoneguygeoff]

Nice! Can't wait to see what you come up with. I was thinking of a mount to the right of the air vents on the center of the dash maybe.

 

[bvjkin]

Hello i am starting to design stuff for 3d printing that will be useful for others as well. I have already made a vent holder for the UltraGauge scan tools and would like other ideas! Let me know what you would like and i can try my best to make it!

 

[dozerfrelich]

I currently have the first draft printing and am making a holder that clips into the vents like my scan gauge holder

 

[MTD]

I'm interested in seeing what you came up for your tablet mount. I'd like to mount my Ipad mini on the dash somewhere.

That was me lol

 

[thatoneguygeoff]

That was me lol

What was you?

 

[MTD]

What was you?

I was designing a tablet mount for the 4runner to be 3d printed. I have a universal one that goes into the cup holder, still haven't found another area where it isn't in the way though...

 

[thatoneguygeoff]

Ah ok

 

[MTD]

Found a Ipad mini so i will start desiging one tomorrow and hopefully have a pro to type by tomorrow afternoon ish

What time do you have class tomorrow I wanna stop over and see your new setup. Did you get a roll of that filament I made BTW?

 

[decker1]

Bump! Was fortunate enough to received= a 3D printer for xmas with a max print size of 12Wx12Lx14H inches. Ideas anyone?

 

[Boort]

[MENTION=96061]decker1[/MENTION]

Bump! Was fortunate enough to received= a 3D printer for xmas with a max print size of 12Wx12Lx14H inches. Ideas anyone?

After you get the printer dialed in, Check out this collection of Toyota parts and accessories for anything that would be useful. I'm not the author of any of these but collected them to print.

https://www.thingiverse.com/Boort/collections/toyota


Boort

 

[Bandit Runner]

That’s a good size printer. What materials can you print with?

 

[decker1]

Besides ABS im not entirely sure. I would imagine anything wth a 1.75mm filament size.

That’s a good size printer. What materials can you print with?