3rd Gen T4R Picture Gallery

[KellyJ]

BAMF

 

[Clemsonfan15]

Cool picture. Looks like fun.

 

[Matt Starr]

That's how we roll, CO rules

 

[spongerx]

Sweet pic Matt.

 

[shawnstcyr]

Here's a link to some of my '99 Runner pics. Enjoy!http://s701.photobucket.com/albums/ww20/shawnstcyr/

 

[Clemsonfan15]

Here's a link to some of my '99 Runner pics. Enjoy!http://s701.photobucket.com/albums/ww20/shawnstcyr/

Awesome man. Even at 206,000 it can still handle going off road. Just shows you what Toyota built them for.

I don't know if I could do the whole sand thing.

Some of those pictures looked like you were about three inches from scraping your side. So close!

 

[shawnstcyr]

Thanks!

Awesome man. Even at 206,000 it can still handle going off road. Just shows you what Toyota built them for.

I don't know if I could do the whole sand thing.

Some of those pictures looked like you were about three inches from scraping your side. So close!

Sand is easy, it's hard to tell from those pics, but one of those dunes is 250 ft. tall. Just air the tires down to about 12 to 15 psi. it'll go right through it. This creates a larger surface area.

 

[DavidAlexander]

Sick

 

[racedirt1]

 

[DavidAlexander]

I like...all the midwest people should plan a trip to meet up in indiana or something.

 

[racedirt1]

We could do Badlands sometime. You should come out to Cliffs for the Toyota Jambo. Last weekend in July.

 

[DavidAlexander]

We could do Badlands sometime. You should come out to Cliffs for the Toyota Jambo. Last weekend in July.

Ill try to start planning for the Yota Jambo in July, Cliffs is even farther west than Chicago right? That is pretty close as well as Badlands. We'll have to try and plan a trip.

I did see that Paragon is running through SnowShoe WV now, that would be a pretty sweet ride.

 

[DavidAlexander]

Here is my new Budbuilt skid. I am letting it get a little "finish" to it before POR-15 in the spring. Sliders are going on as soon as my friend and I can coordinate the same day off.

 

[Clemsonfan15]

Looks like it is beefy. Does it bolt on or is it welded?

Your tires seem really wide. Maybe it's the angle or something.

 

[KellyJ]

Nice skidplate DA.

+ 1 for the Badlands. That place was pretty fun. I was out there every weekend around this time last year.

 

[racedirt1]

Here is my new Budbuilt skid. I am letting it get a little "finish" to it before POR-15 in the spring. Sliders are going on as soon as my friend and I can coordinate the same day off.

Nice, beat the hell out of that new skid and let me know how it holds up. If its strong I may get myself one.

What are you doing for sliders? I got mine from Adam at 4Xinnovations, couldn't be happier. I would highly recommend him.

 

[DavidAlexander]

It is bolt on. It is so heavy I had to lift it with my jack to bolt it up easy. Two of the bolt holes up front had horrible threads and one broke off half way so I drilled those two out and put 3/8" stainless hardware in instead.

I will be heading out to the Badlands too so we'll have to meet up.

As for the sliders I have some Stubbs sitting in my hallway creating an obstacle until I can weld them on. My friend is a welder so I just have to work out a day to use his workshop at his house.

 

[racedirt1]

Look for the TLCA clubhouse on Mud "windy city cruisers". Gonna be a run at Badlands the 14th of March. I will be there.

 

[DavidAlexander]

Look for the TLCA clubhouse on Mud "windy city cruisers". Gonna be a run at Badlands the 14th of March. I will be there.

Thanks, Ill check that out although it may be a little too close, ill have to see what is going on. I will keep on eye on Mud also to see when you guys meet up.

 

[ssssteveo103]

My 4Runner grew a beard to deal with the cold of Idaho.