Victory 4x4
Official Vendor
I'd say it's more a little more satin than flat, but it does have a slight texture to it. It's a little easier to tell in this photo.
It is also available in bare metal if you want to paint/powder coat it yourself!
4th Gen 03-05 & 06-09 Front Integrated Bumper! 15 Percent Off Intro Pricing!
- Thread starter Victory 4x4
- Start date
I'd say it's more a little more satin than flat, but it does have a slight texture to it. It's a little easier to tell in this photo.
It is also available in bare metal if you want to paint/powder coat it yourself!
Bluesky 07
Senior Member
I assume the holes in those attach points will take the pin of a 3/4” shackle?
Also, and this question is from a winch newb, aren’t most fairleads installed vertically? Will the angled setup cause any complications when winching or will it be the same as with a vertical opening?
Also, and this question is from a winch newb, aren’t most fairleads installed vertically? Will the angled setup cause any complications when winching or will it be the same as with a vertical opening?
Last edited:
Victory 4x4
Official Vendor
Yes, you are correct, meant to accept a 3/4" shackle.
The fairlead opening won't be an issue at that angle. The fairlead itself is there to guide the winch line so it won't contact the edge of the bumper.
Victory 4x4
Official Vendor
03-05!
Our 4th Gen Blitz Bumper is now available for 03-05 as well! More photos to come.
4Runner Front Winch Bumper | Blitz w/Tube | 4th Gen (03-09) - Victory 4x4
4Runner Front Winch Bumper | Blitz | 4th Gen (03-09) - Victory 4x4
Our 4th Gen Blitz Bumper is now available for 03-05 as well! More photos to come.
4Runner Front Winch Bumper | Blitz w/Tube | 4th Gen (03-09) - Victory 4x4
4Runner Front Winch Bumper | Blitz | 4th Gen (03-09) - Victory 4x4
Attachments
JVC8790
New member
Any plans to cut the ends of it more vertical? It looks like this has the same taper on the sides as the 06-09 does to match up with the bumper shape on those years, but with the 03-05 having such a vertical line at the end of the lower grille.
Victory 4x4
Official Vendor
We had this discussion internally and everyone here agreed that the angles on the bumper give the front end some shape. Otherwise, it’s just a bunch of rectangles. The lines match the slope of the grill.
Victory 4x4
Official Vendor
Yes, we will! We are working on the 5th gen rear right now.
JVC8790
New member
I'm glad to see that there was discussion about it and it wasn't just "make the 06-09 fit"
I still like the idea of a straight cut and recessed in the bumper opening, but I guess this is the best way to give us a 06-09 front end look for us 03-05 owners.
Victory 4x4
Official Vendor
Yeah, they will still be separate bumpers. The side profile will change to make it fit flush with the 03-05 front end.
JVC8790
New member
Do you have any pictures of this fitment or a side profile?
Victory 4x4
Official Vendor
15-20 days.
Victory 4x4
Official Vendor
Not yet, but soon! Probably early next week.
chompster4runner
New member
I 2nd this. I already hate how much the front bumper protrudes. Would like it recessed just like the original.
I'm with you on this. Was hopeful for this, but imo it just doesn't look good.
04rnr
New member
any word on this?
TheNorseman559
New member
I know its been posted, however that was 3 years ago. What's the lead time on these? If I order all bumpers and carriers, will it ship as one package in freight or multiple?
SMH..... Further research and a little more patience, I would have noticed you have the LEAD TIME actually on your page... I have been stationed in California to long it has rotted my brain.
Last edited:
Gamblin4Runner
New member
4th Gen Sliders
Should be coming out in April or May - can't wait to see what they look like!
Should be coming out in April or May - can't wait to see what they look like!
