4th gen noob questions

[Brutalguyracing]

Ok i have a 03 limited and i have a bunch if questions i could use help with
I am a former 2nd gen fully modded tacoma owner
But i am still learning the 4runner

Ok for the question
1......I will be installing some king coils 700lb spring ext travel up front
Can i ditch the sway bar like i did on my taco

2.....any storage ideas for tools and parts and such or are you guys just using tool bags

3.....can i remove the side grab handle and pilar plastic without airbags going off
Here is a pic of what i want to remove to hardwire my ultragauge and gps

4..... Any problems using an ultragauge on a 4th gen

5.....is there any way to open rear hatch from inside
Id love to be able to open it from inside

6...... Keys and key fobs
What are you guyz paying for a new key cut
$80 for key here.... And i would another key fob?
What do they run and where can i get them

7......anyone running 315-70-17's
On a 3"

Thanks in advance

 

[zopperman]

Ok i have a 03 limited and i have a bunch if questions i could use help with
I am a former 2nd gen fully modded tacoma owner
But i am still learning the 4runner

Ok for the question
1......I will be installing some king coils 700lb spring ext travel up front
Can i ditch the sway bar like i did on my taco

2.....any storage ideas for tools and parts and such or are you guys just using tool bags

3.....can i remove the side grab handle and pilar plastic without airbags going off
Here is a pic of what i want to remove to hardwire my ultragauge and gps

4..... Any problems using an ultragauge on a 4th gen

5.....is there any way to open rear hatch from inside
Id love to be able to open it from inside

6...... Keys and key fobs
What are you guyz paying for a new key cut
$80 for key here.... And i would another key fob?
What do they run and where can i get them

7......anyone running 315-70-17's
On a 3"

Thanks in advance

1) Yes, and you should. I have no front sway with 620 lb coils, rides like a dream.
2) I have a tool box in the trunk
3) I have taken that whole A pillar trim off without issue, few bolts and a clip or two - I would disconnect the neg batter terminal anyway
4) no people do it all the time
5)Yes, there are a few threads on it. Here is one: http://www.toyota-4runner.org/4th-g...d-sr5-aka-spock-build-thread.html#post1398647
6) Key fobs on the cheapo http://www.toyota-4runner.org/4th-gen-t4rs/99215-how-make-spare-chipped-keys.html

7) It can be done, body mount chop, lots of trimming, Probably 1.5" BL, search around for info on fitting 35's... Also on t120 lot more guys do it there, but it definitely can be done.

8) Buy shrockworks sliders from the GB

9) Here is a rear bumper thing that's in the works. You could mate this with a hitch mounted TC thing

http://www.toyota-4runner.org/4th-gen-t4rs/140135-shallcallhimtim-build-5.html