4th Gen specific for sale thread

[Berty_K]

Weather is getting warmer and (socially distanced) camping is right around the corner. Someone buy my drawer setup!!

Anyone in the Chicagoland area interested in buying my custom drawer setup? Asking for cost of raw materials: $450

Specs:
-Width: 41”
-Length: 35”
-Height: 11”
-Two drawers
-3/4 inch plywood all around
-includes plywood sleeping platform (low tech, but gets the job done)
-27” drawer slides (150 lbs capacity)
-Turnbuckles to keep things in place
-Ruggedized rubber top

 

[Sukhoi]

All components have been completely removed down to the last bolt and fastener
And are available
Still available:

Body parts: White
Hood
Front bumper

Suspension parts:
All available
Drive shaft (2wd)
Power steering rack
With pump and reservoir
Ac compressor
Complete rear axle assembly
Springs
Sway bars
All control arms (front and rear)
Panhard bar


Electrical:
All available

Interior: Tan
Headliner
All Plastic panels (tan)
Steering wheel and complete shaft
Oh shit handles
Sunglasses holder
All Seat belts
All Air bags
Sun visors

Wheels and tires:
17” flow formed wheels
255/75/17R BFG mud Terrains 2 @90% 2 @50%
$400

Aftermarket suspension parts:
Total chaos UCA’s $450
Icon 2.5 rear shocks with reservoirs $450 ( used for photo shoot on a weekend wheeling trip)SOLD
Walker Evans 2.0 rear shocks with reservoirs and adjusters $450 (New)
Rear 1.5” Daystar spacers (new)

Is the headliner still available? I'm looking for a non-sunroof one.

 

[mysticz]

Weather is getting warmer and (socially distanced) camping is right around the corner. Someone buy my drawer setup!!

I would be all over this but too far from me. Got to be someone close who wants this, great deal at cost only.

 

[JVC8790]

Still available?

Sorta, I had 2, the one pictured is sold, I still have one on my truck since I haven't gotten around to completing the 06-09 swap on the grille.

 

[royal T4R]

Sorta, I had 2, the one pictured is sold, I still have one on my truck since I haven't gotten around to completing the 06-09 swap on the grille.

Id be interested in your 03-05 when you complete the swap.

 

[RickF]

Hey guys - Ive had my rusted liftgate/ tailgate for sale for fairly cheap for the last month. A few nibbles but no bites. Im ready to give it away to anyone interested. Let me know before I donate it to a junk yard or something. Probably worth more as parts than as a whole

Used 4th gen 4runner Liftgate - auto parts - by owner - vehicle...

Not interested in the rusty liftgate, but curious where/what you got a replacement

 

[JONBOY345]

Not interested in the rusty liftgate, but curious where/what you got a replacement

Not who you're asking, but you can try car-part.com

Plug in your VIN and off you go.

 

[Syr4RinNC]

Not interested in the rusty liftgate, but curious where/what you got a replacement

First one I got from a junk yard. Second one from a seller on Facebook parting one out. Got both for $500 a piece

 

[gaswede]

Weather is getting warmer and (socially distanced) camping is right around the corner. Someone buy my drawer setup!!

tried PMing but it doesnt look like it went through. can you send me some pics of these drawers please? thanks man.

 

[Berty_K]

Anyone in the Chicagoland area interested in buying my custom drawer setup? Asking for cost of raw materials: $450

Specs:
-Width: 41”
-Length: 35”
-Height: 11”
-Two drawers
-3/4 inch plywood all around
-includes plywood sleeping platform (low tech, but gets the job done)
-27” drawer slides (150 lbs capacity)
-Turnbuckles to keep things in place
-Ruggedized rubber top

More pics for reference.

Each drawer is about 26.5 inches long and lined with a cushion to prevent rattling

Each drawer is 16.5 inches wide

Other drawer- you’ll also notice the plastic sliders. They keep the drawers from rattling around when I drive. Absolute silence. Also make the drawers “soft close.” They’re still easy to open and close.

Drawers are both removable

View of slide and latching mechanism

Cubby on the backside of the drawer system, adjacent to the second row seats.

Another view of the cubby

Sent from my iPhone using Tapatalk

 

[JBend]

WTB silver front bumper. I've got a 2007 if this makes any difference. Also if anyone has some Sequoia wheels for sale I may be interested. Thanks.

 

[adkfinn]

18" limited wheel - free with complimentary flaking paint. You pick up in VT. I will throw in a set of running boards from my limited also.

 

[DaveRh]

Used CV's

CV shafts are out of a 2005 we bought new.
Thought I would post them here before I return for my core charges.

Street used only, one side had a torn boot, so I replaced the both sides.
One could be used as a spare, one needs boots.

$60.00 for the pair, pickup only in Parker, Colorado

CV's are SOLD ! Thanks !

 

[jay22]

2” body lift. Used for about 2 years. My original intention was to fit 35s with minimal trimming but never did so I removed the lift. Bought from fat pats body lifts. Most of the hardware is not included as I had to cut some bolts off. I will include 2 bolts for Length/size reference. Also the steering shaft spacer is pretty jacked but I’ll include it. $50 buyer pays shipping. Fort Rucker, Alabama.

 

[Jayson44]

CV shafts are out of a 2005 we bought new.
Thought I would post them here before I return for my core charges.

Street used only, one side had a torn boot, so I replaced the both sides.
One could be used as a spare, one needs boots.

$60.00 for the pair, pickup only in Parker, Colorado

so one has new boots and is good to go? and the other needs boots?

J.

 

[jaemz]

hey all, ive got a couple parts for sale, photos coming soon.

2017 5th gen TRD PRO (bilstein) suspension, 30k miles on it
2017 5th gen OEM suspension, 27k miles on it
2017 5th gen OEM UCA's

from what i'm told these parts will bolt onto a 4th gen? can someone confirm? also, what would be fair pricing for all of this? willing to ship on buyer's dime.

 

[DaveRh]

so one has new boots and is good to go? and the other needs boots?

J.

One shaft has the original boots, other one has torn original boot.

CV's have been SOLD !

 

[Berty_K]

FS: Rear Differential Kit, $40, Free Shipping

I’m selling a rear differential breather kit for our trucks. This kit relocates the breather into the engine bay near the other breathers. There are two reasons you would want to do this:

1. You drive in deep water: if you’re on a trail and your rear differential becomes submerged, the sudden cooling of the differential causes the pressure in the housing to drop. Water gets sucked into your housing, mixes with the gear oil, and damages your differential.
2. Your breather doesn’t work anymore: If you have an old or rusted breather, there’s a good chance it is no longer working. If the breather can’t release pressure and oil gets pushed out of the differential seals, causing premature wear.

This is a “beginner friendly” DIY, so no need to be intimidated! My instructions (provided here) will walk you through the entire process from start to finish. I’ll also provide my contact information for you to reach out if any issues come up.

Kit cost is $40 shipped anywhere in the US. Payment via Paypal, Venmo, or Zelle. All components are manufactured in the USA and are high quality.

• 15 feet low pressure fuel line
• 1 male brass barb (Threads into rear differential)
• Breather assembly (90 micron nickel-plated steel breather and female brass barb, assembled with teflon tape)
• 2 stainless steel worm drive clamps
• 1 galvanized steel loop clamp
• M6 locknut
• 10 zip ties
• Instructions (also attached to this post)

Items you will need:

• 14 mm wrench or deep socket
• 10 mm wrench or socket
• ½ inch wrench or crescent wrench
• Snips or scissors
• (Optional) PB Blaster/penetrant
• (Optional) Jack, Jack stand, Wheel Chocks

Compatible vehicles:

• 3rd, 4th, 5th gen 4Runner rear differential
• FJ Cruiser rear differential

Instructions:

 

[4runner06az]

hey all, ive got a couple parts for sale, photos coming soon.

2017 5th gen TRD PRO (bilstein) suspension, 30k miles on it
2017 5th gen OEM suspension, 27k miles on it
2017 5th gen OEM UCA's

from what i'm told these parts will bolt onto a 4th gen? can someone confirm? also, what would be fair pricing for all of this? willing to ship on buyer's dime.

Hey do you have the rear end links from the 5th gen 4runner?

 

[97BlackAckCL]

FS: Axxess ASWC Steering Wheel Control Adapter - $20 Pittsburgh, PA

Had this in my 4th Gen and it worked great, this will work with any head unit that has the 3.5 headphone jack connection. I didn't end up using in my 5th gen because I bought an iDataLink.

Selling for $20 shipped

https://www.toyota-4runner.org/for-sale-non-t4r-items/287072-fs-axxess-aswc-steering-wheel-control-adapter-$20-pittsburgh-pa.html#post3502437