5th Gen Aluminum Roof Rack Using OEM Siderails: NiseRack

[Eitek1]

Man the hits just keep on comin'
That really sucks. Hope you get it sorted

You have no idea. If I told you the whole story you wouldn’t believe me. I think I said that elsewhere in this thread already but my life is surreal.

At this point, I think there is a camera following me around and I’m the star of some TV show I’m not aware of. In the last 6 months I have been witness to a shooting, my car being totaled, a number of thefts and someone getting murdered with a sword. No, I’m not exaggerating or making this up.

 

[s13koop]

Lol, I've definitely read the stories earlier in the thread but the sword is a new one.

 

[sn_85]

You have no idea. If I told you the whole story you wouldn’t believe me. I think I said that elsewhere in this thread already but my life is surreal.

At this point, I think there is a camera following me around and I’m the star of some TV show I’m not aware of. In the last 6 months I have been witness to a shooting, my car being totaled, a number of thefts and someone getting murdered with a sword. No, I’m not exaggerating or making this up.

You need to leave immediately. A change of scenery and luck is in order!!!

 

[BenderRodriguez]

Payment methods

Hi! I'd like to order, but the website says you are not able to accept online payments and to contact you to complete the order. I might have missed it, but I don't see contact info. Can you help out?

Thank you!

 

[Eitek1]

That's weird I'll have to check.

 

[BenderRodriguez]

Thank you!

 

[BenderRodriguez]

It's working now. Whatever you did, thanks again!

 

[Eitek1]

It's working now. Whatever you did, thanks again!

I updated some stuff the other day and failed to hit “accept” in one of the entries. I figured it out last night. Thanks for your patience.

 

[808SNOW]

You need to leave immediately. A change of scenery and luck is in order!!!

You have no idea. If I told you the whole story you wouldn’t believe me. I think I said that elsewhere in this thread already but my life is surreal.

At this point, I think there is a camera following me around and I’m the star of some TV show I’m not aware of. In the last 6 months I have been witness to a shooting, my car being totaled, a number of thefts and someone getting murdered with a sword. No, I’m not exaggerating or making this up.

Seeing all of that used to be in a day’s work. You need to take a load off by following one of your racks and making it out this way! Keep up the hard work—it’s much appreciated. Here’s another example of this great product:

 

[Eitek1]

That really looks great. I’m so glad you’re happy with it. I’m going to take your advice. I’m going to buy some kayaks in the next few weeks and put my rack to use hauling something other than work supplies.

Also, I’m pretty sure you don’t have the first Nice Rack in Hawaii but I’m pretty sure you have the first NiseRack. Lol

 

[Endle55_5earch]

Question: What is the total Length of the crossbars, end to end, from the farthest mounting distance apart (I hope this makes sense).

I'm trying to see if I can mount a set of Roam 95L boxes up there with this setup or if I have to save up for a full rack. Thanks for the help!

IMAGE FOR CLARIFICATION:

 

[headstaller]

37 3/4"

question: What is the total length of the crossbars, end to end, from the farthest mounting distance apart (i hope this makes sense).

 

[Endle55_5earch]

37 3/4"

Thank you, the way I want to mount dual 95L Roam Cases won't work with this setup but 1 95L will work if I mount it the width of the car. I appreciate your help.

 

[skag1T]

Any idea if a Thule cargo box can be installed on this rack ?

If not, is there a cargo box that can be installed ?

I am aware of the rifle cases solution, but that is a fixed install, and I want to be able to remove and install the box quickly.

Thanks

 

[808SNOW]

Not sure about a Thule box, but noticing there is a photo in the gallery that features a cargo box:

Gallery | NiseRack.com

Based on that gallery photo, looks like a SportRack Skyline cargo box might be a possibility:

SportRack Skyline SR7095 Roof Box , Proline Truck, Car Custom Roof Racks: Thule Racks, Yakima Ski Racks, Hitch Bike Racks, Canoe and Kayak Racks, Cargo Carriers

 

[shoong]

this is the solution I am looking for. Looking to mount gas cans and recovery boards: what mounts would I use? Also, do these only come in the aluminum finish?

 

[ElectroBoy]

this is the solution I am looking for. Looking to mount gas cans and recovery boards: what mounts would I use? Also, do these only come in the aluminum finish?

As mentioned in the FAQs on the NiseRack website by [MENTION=176262]Eitek1[/MENTION] the brackets are bare aluminum with no finish. You’d have to rattle-can spray them black yourself.

Frequently Asked Questions | NiseRack.com

You can order the extruded bars with black finish from TNutz.

EX-1030-BLACK – 1″ x 3″ BLACK Smooth T-Slotted Aluminum Extrusion | TNUTZ
Order the dimensions at post 16 (also in FAQs).

PS, what is your model year?
Dimensions are different for MY 10-13. Listed elsehere in the thread.
(Edit, here):
https://www.toyota-4runner.org/3573964-post149.html

As are some ideas for TNutz mounting hardware.
Look at posts #177 and 178:
https://www.toyota-4runner.org/3589720-post177.html

 

[Endle55_5earch]

Installed my Nise Rack!

Jason the creator of Nise Rack was fantastic to work with. I needed a quick solution for exterior storage (mainly recovery, air up/down, dirty storage) and I got this rack delivered, installed, and ready to go in about 10 days! Also, this setup is easy(ier) on the wallet.

 

[ElectroBoy]

Installed my Nise Rack!

Jason the creator of Nise Rack was fantastic to work with. I needed a quick solution for exterior storage (mainly recovery, air up/down, dirty storage) and I got this rack delivered, installed, and ready to go in about 10 days! Also, this setup is easy(ier) on the wallet.

Good job! Can you provide some details of the hardware and part numbers you used to mount your boards and storage box? Thanks.

 

[sn_85]

this is the solution I am looking for. Looking to mount gas cans and recovery boards: what mounts would I use? Also, do these only come in the aluminum finish?

Since it's 80/20 extrusion you can get any of the mounts and adapters from companies that make extrusion mounts.

Here are a few for example. They sell mounts for traction boards and rotopax but you can also get jerry can ones too from Rhino Rack, Front Runner or Eezi-Awn.

Mounts & Brackets | upTOP Overland
Mounts & Brackets