Jc12
New member
Are you running oem? Or do you have a lift.. I have two sets of stock shocks/springs.
99 limited BUILD THREAD more photos than your first 3some
- Thread starter Jc12
- Start date
Are you running oem? Or do you have a lift.. I have two sets of stock shocks/springs.
t4runner604
New member
bilstein adjustables with stock coils. just need time do it. start a new thread organize a trail meet with vancity folks, there should be some on t4r.
t4runner604
New member
oh and heres my baby.. taken at eagle ridge coquitlam.
Last edited:
t4runner604
New member
whats wrong with the axles? leaky boots?
absalom
New member
I'd check to make sure that your steering guide doesn't need adjustment and/or your bushings aren't shot. The shop said the same thing about my tie rods when all I needed to do was replace the bushings and tighten my steering rack guide.
It's coming along nicely! Time to ditch the brush guard and running boards tho
It's coming along nicely! Time to ditch the brush guard and running boards tho
Jc12
New member
well after the lift i ran it for a few days and i was leaking grease pretty bad, i had the alignment done (to the best they could) and put in the diff drop.. i still have noticed some leaking at the larger side of the inner boots.. i re clamped the others up and they are fine. I have lost a decent amount of grease and have been told with 260 KM i should be looking at new axles if im goin off the beaten trail.. thoughts?
Jc12
New member
I'd check to make sure that your steering guide doesn't need adjustment and/or your bushings aren't shot. The shop said the same thing about my tie rods when all I needed to do was replace the bushings and tighten my steering rack guide.
It's coming along nicely! Time to ditch the brush guard and running boards tho
The only sympton i have is when i turn the wheel when completely stopped the steering wheel jerks and i get a slight noise.. when i am moving its completely smooth...
And as for the brush and running boards.. i know i know, i just dont like jumping into my truck.. i love the nice easy step
i actually went to remove it and on the rear side of the running boards the nuts had somehow slid right into the running board so i cant get a wrench/socket over them to remove.. i will post pics. anyone have a clue or seen this? And ya the brush guard gooessss soon.. i sadly agree i just want to be able to mount the lights somewhere practical (i actually do use them
)
the great him
Elite Member
why do you still have the running boards on? take those things off and toss them...
blcktpgsr
New member
I completely agree on this one..it's about time Vancouverites get together for a run or two. There's a number of local members here that i've yet to meet and go wheeling with.
Let's make this happen guys.
Jeff you should organize this meet.
t4runner604
New member
yeep im totally down. lets take a trip to hale creek or somethin.
t4runner604
New member
dont replace you axles, just replace the boots.
Jc12
New member
okay thanks guys.. so i LISTENED for once.. however i have some very stubborn running boards.. im going to start a thread in case anyone has seen similar issues removing them, AND fine i will agree to take on the vast responsibility to organize a meet.. you guys have to help with the destination tho.. I am barely broken in on the local trails
New tires coming woot woot
however i have some very stubborn running boards.. im going to start a thread in case anyone has seen similar issues removing them, AND fine i will agree to take on the vast responsibility to organize a meet.. you guys have to help with the destination tho.. I am barely broken in on the local trails
New tires coming woot woot
4Running Daily
New member
I'm scrolling through those pictures and saying, wow he needs bigger tires.
Jc12
New member
i mentioned it! 285/75/16's coming hopefully this week.. awaiting their arrival.. damn rubber is not cheap. I am going to get concours A/T.. i get a very cheap wholesale price on them 600 ish for brand new. I of coooourse wanted BFG's but at double the cost i couldnt bring myself to do it
tbst
New member
And a Hi-Lift jack to replace that shovel and sliders.
Jc12
New member
i want to mount the hi lift but i dont know whether my rack can support it.. here's the info.. its a cheapo i use to carry my ski and camp gear
Amazon.com: 48.5" Roof Luggage Cargo Storage Rack with Fairing: Automotive
Jc12
New member
So not this Sunday but the next?
