A10MileHusker's 4th Gen Build Page

[A10MileHusker]

Here is a build thread outlining the current mod's to my 4Runner.
Stock

Update as of 1/30/17:



2005 Toyota 4Runner Sport Edition V8

Performance:
4.7L V8
Yukon 4.88 Gears Front and Rear
K&N Cold Air Intake
Flowmaster Super44 Exhaust
Fumoto Drain Valve


Suspension:
OW Radflo 2.5"700 lbs coilovers with 14" eibech springs
Toytec Top Plate Spacer
Camburg UCA
1.5" Roger Brown Body Lift
3.5" AllPro Rear Springs with Icon Long Travel 2.0
SS extended rear brake lines
Rear diff breather extended to gas cap area
Custom Rear End Links
CVJ Axles with Off Road Red Boot

Armor:
Custom Rear Bumper
Perkins Performance Front Bumper
Hanna Quality Sliders
Budbuilt Front, Mid, Transfer, Rear Diff Skid Plates

Recovery:
Smittybilt XRC8 8000lb Winch with Synthetic Rope
ARB Tire Deflator
Harbor Freight Hi-Lift (soon to be replaced with Hi-Lift)
Viair Constant Duty Onboard Air System
Shovel

Wheels:
OEM Sport Edition Wheels
Plasti-Dipped Black

Tires:
Toyo Open Country MT 35x12.50/17


Interior:
sPOD
WeatherTech digi mats
Garmin Nuvi 265W
Garmin GPSMAP 64ST

Audio:
Pioneer AVHX5700BHS Head-Unit
Jl audio JX250/1 Amp
JL audio 8w1v3-4, 8" sub in stock enclosure

Exterior:
2006+ headlight/taillight upgrade
Mini Morimoto RetroQuik Bi-Xenon Projector Swap
BajaRack 4th Gen 4runner Long Rack
Rigid D2 Spot Front Fog Lights
Rigid SR 10" Spot in Hood Scoop
Rigid Ignite Diffused Alley Lights x4
Rigid Dually Rear Lights
DDM Spot Round Pods
CSI W4848 Rear LED Lights

Want List:
Lockers
Tube Tie Rod with Heim Joints
Budbuilt Gas Tank Skid

 

[A10MileHusker]

Installing the Lift

Bigger Coils

Upgraded to Billstein shocks with the Toytec 3" Spacers for the front

Sliders

Sliders and Bull Bar

New Tires (Goodyear Wranger MT/R)

8000k HIDs

 

[A10MileHusker]

And Finally, Some pictures from the recent wheeling trip.

Doug

 

[alaskaman]

V. NICE

Impressed. :bowdown:

 

[A10MileHusker]

V. NICE

Impressed. :bowdown:

Thanks alaskaman!

Forgot to mention the To Do List:
Shockworks or Armorology Front Bumper
Gobi roof rack
Spidertrax Wheel Spacers
Full Skid Plates (not sure what brand)
CB relocation
GPS
Possibly purchase better Sliders (weld on)
Rear Cargo Storage System
CO2 system

There's probably some more that I can't recall right now. :biggrin2:

Doug

 

[sn0wrunner]

she sure is turning in to a real beauty!

 

[4runnerfourplay]

Looks really good man, I have been thinking about doing a thread like that lately too. I really like your sliders a lot, where did you get them? Where did you mount your CB on the inside? I have been thinking pretty hard on getting one of those too. I like the gobi rack a lot too, kinda pricey but a very nice unit I am going to pick one up when I get back stateside next year.

 

[A10MileHusker]

Looks really good man, I have been thinking about doing a thread like that lately too. I really like your sliders a lot, where did you get them? Where did you mount your CB on the inside? I have been thinking pretty hard on getting one of those too. I like the gobi rack a lot too, kinda pricey but a very nice unit I am going to pick one up when I get back stateside next year.

I bought my sliders from another guy on this forum. They are Hanna Quality Sliders. I've heard that hes stopped making the sliders but I could be wrong.

I have my CB velcroed on the center console right by your right knee when you're driving. It doesn't get in the way or anything! I love the place but I'm going to find a more permanent place for it. I was thinking about the compartment right under the AC controls. We'll see If I can fabricate something.

 

[4runnerfourplay]

I have my CB velcroed on the center console right by your right knee when you're driving. It doesn't get in the way or anything! I love the place but I'm going to find a more permanent place for it. I was thinking about the compartment right under the AC controls. We'll see If I can fabricate something.

I was thinking the same thing, I dont really use that compartment for anything, I was going to take it out and see how much room there is behind it and maybe see about molding a CB into that spot.

 

[A10MileHusker]

I was thinking the same thing, I dont really use that compartment for anything, I was going to take it out and see how much room there is behind it and maybe see about molding a CB into that spot.

Took a look today. It's definitely possible. You'd have to do some dremeling though to get it to stay there. We'll see if I end up doing it.

 

[gorbonzobeans]

Where were these pics taken at?

 

[A10MileHusker]

Where were these pics taken at?

The off road pictures were from Yankee Hill.

 

[Falls]

Damn Doug ...... what a transformation. Nice job !!

Where did you get the bull bar ? Could the lights be mounted on that ?????

 

[A10MileHusker]

Damn Doug ...... what a transformation. Nice job !!

Where did you get the bull bar ? Could the lights be mounted on that ?????

Thanks! The bull bar I bought off of ebay. Link to Bull Bar

There are no grommets for lights on this bar. All it is is a round bar up top with two flat sides that run down to the frame. It's pretty cheap but I think aesthetically it helps. :biggrin2:

 

[matroe11]

is that a board rack on top of your truck? If so, what kind?

 

[A10MileHusker]

is that a board rack on top of your truck? If so, what kind?

Yakima FatCat 6. GET IT!! :bigok: It's a little lower profile which allows less wind resistance and also super wide. You can fit 4 boards on them if you needed to with extra space.

VERY highly suggest


Link to Racks

 

[ric]

how did I miss this thread, lol the rig is coming along nice, your driving skill is coming along even BETTER.
As far as the bumpers IMHO Id go with Armorology, this way YOU, can design and get what YOU want, I havent seen a SW in person, just photos online, but from what I tell, theres no compairison, IMHO.
CB, if ya got a single DIN stereo, you could mount the CB under the radio, like Glen and Jeff have.
Skids, budbuilt.
CO2, keep checking Craigslist and the forums, my set up was $100.
Just my .02cents, lol

 

[bobbyavidity]

Wow that looks great! I love your sliders.

 

[ric]

Is this what you are talking about Ric:

http://denver.craigslist.org/for/1154430857.html

Does that sound like a tank that would work for airing up?
I am broke, so I don't have dibs on it if any of you guys want to pick it up. It was just posted.

Sorry to go off-topic...

yeppers :bigok:

 

[PaulSula]

Great looking runner. When I move to NM I will have to take a trip to Denver to go off-roading with you guys.