"Sasha" Build Specs

[MrSeth]

Hey folks!

At one point in time I believe I had a pretty clustered build thread with mixed photos, parts, and stories that never really made much sense. I cannot find said thread so I'm going to do a "first day" and "current" photo with a current and past parts list. Something simple and to the point!
----
Name: Sasha (no not Sasha Grey, albeit it does make sense)
Purchase Year: 2015
Year: 2004
Owners: 2
Trim: Sport Edition
Engine: 2UZ-FE
Mileage: 224,030 (07/17/2020) Purchased with 153,540
Color: Galactic Grey Mica
----
Current Parts List:

Suspension:
FRONT: Light Racing Upper Control Arms, Bilstein 5100 (Top Perch), NEW OEM V8 coils, Supreme Suspenions 1.5" Aluminum spacer.
REAR: ProComp ES9000 10.2" Travel, ProComp 2.5" Lift Springs, Daystar 2" Spacer
REMOVED Rancho 2.5" Quick Lift, Supreme Suspensions 2" Aluminum Spacer, FJC rear coils with Daystar 2.5" Spacer, +2.5 Long Travel

Body Lift:
1.5" Delrin BL, NEW Grade 8 Hardware

Wheel Adapters:
1.5" Spidertrax Hubcentric

Wheels:
Unique 17x9 +0mm Soft 8's
REMOVED 2010 4Runner 17" takeoffs, 2004 OEM SE Wheels

Tires:
315x70r17 Hankook Dynapro ATM-RF10
REMOVED Cooper MTP 315x70r17, BFG ATKO2 285x75r17

Roof Rack:
DIY Full Length 3/4"-1" Tube with sunroof cutout
REMOVED 64" EGO BIKE Amazon Rack, 1" Square tube rack full length, 1" square tube half rack (sold to another member)

Front Bumper:
DIY 1.75"-2" Tube and Bash plate
REMOVED 2" DIY Tube bumper with hoop

Rear Bumper:
DIY 2" Fold down Stinger Style

Lighting:
2004 to 2006 Projector Upgrade (55W Halogens)
Amazon 4x LED RGB Rock light kit
KC Lights 4x 100W Spots
Nilight 2x LED Floods (in bumper for fog)
REMOVED 50" LED Roof light, 36" LED bumper bar, 9" ARB LED Spots 2x, 3" Nilight roof rack area lights 6x, 5x LED Amber/White Switchback floods (front bumper)

Air:
Smittybilt Rear Mounted OBA Compressor (no tank)

Interior:
BOSS Audio 6.2" LED Head Unit
Kicker Audio Rear Door Speakers
Kenwood Audio Front Door Speakers
2005 Limited Heated Leather Seats
Geo Metro Rear Bench (for better sleeping platform placement)
Rear Plastics Removed
400W Power Inverter
Suede Wrapped Center Console
Suede Wrapped Door Cards
Fly Rod Holder (velcro)
Ram Mount Garmin eTrex20
Ram Mount Phone
REMOVED
Lexus RX350 Seats
eBay Reclining Racing Buckets
Full length sleeping platform

Communication:
TALKCOOP KT-8900 UHF/VHF
Uniden PRO505XL CB

Body:
Duraflex 4.5" Bulge Fiberglass Fenders
RCI Tube Rock Sliders
Rear fenders trimmed 1"
Rear bumper plastic eliminated to fit DIY bumper

Exhaust:
Thrush 26" Glasspack
Thrush Hush Muffler

Service Items:
Timing Belt: Done @ 180k, 223k (slipped 2 teeth when furry animal snuggled in the sprocket)
Inner and Outer Tie Rods: 223k
CV Shafts: 214k, 222k (post LT)
Penzoil 10w-30 every 3k miles
Downstream o2 Sensors @210k
Exhaust gaskets @210k
----
PHOTOS:

Pre-Purchase Documentation:

Day 1: McPherson, KS- 2015

First Wash:

First DayStar Kit:

First "Flex"

[/url]

First Time Mocking up 35's

At this point in time, I moved to OK to restore vintage Porsche and Mercedes. I don't have photos, but I completed the black headlight mod and painted my OEM wheels black. I also fabricated my own half rack (pictured) and have it installed at this point.

Installing Rancho RS9000XL Quick Lift (MB Pagodas in the background)

 

[MrSeth]

Here is another photo of the roof rack, Hi-lift holder

I then built my first offroad bumper one night after work out of some roll cage tubing we had laying around from an old Chevelle.

In 2016 I moved to Colorado and worked for Scuderia Rampante, Ferrari. I sold my black wheels for some 5th gen wheels which I wrapped in the 285-75-17 BFG ATKO rubber. I had removed the metal bumper and replaced it with my OEM one just to experiment

At this point, I wanted to trim a little from the fender wells. So here's that.

Built a full length rack from DOM tubing.

Then added a snorkel from an FJ 80 and Racing buckets