AllPro Apex Front Bumper

[JayRolla]

It fixed mine

I was going to add resistors, didnt know a flasher could fix it. Thanks for info guys!

 

[MStudt]

Just putting a feeler out there. Would there be any interest in a Group Buy or Black Friday special for the Apex bumper?

Here are some details for any considering.

• Bumpers will be altered at AllPro to fit a 3rd Gen
• You'll need to cut off the factory frame horn extension
• You'll need to weld in a bumper adapter mounting plate
• Drill 1 hole per frame rail side
• Bumpers will come bare metal (painting/powdercoating is on you)
• Center hoop option with light mounts
• Low profile hoop option (meant to cover up to a 20" LED bar)

Let me know what you guys think and I'll see what I can put together.

 

[SCRunner12]

I might be interested pending funds. This is one of the bumpers I've been wanting for a very long time. Might wait till I drive out to Montana this spring though to pick up in person, but we will see. Depending on the pricing and cost of shipping I may be in.

 

[GreenbowCounty]

Sounds good

Just putting a feeler out there. Would there be any interest in a Group Buy or Black Friday special for the Apex bumper?

Here are some details for any considering.

• Bumpers will be altered at AllPro to fit a 3rd Gen
• You'll need to cut off the factory frame horn extension
• You'll need to weld in a bumper adapter mounting plate
• Drill 1 hole per frame rail side
• Bumpers will come bare metal (painting/powdercoating is on you)
• Center hoop option with light mounts
• Low profile hoop option (meant to cover up to a 20" LED bar)

Let me know what you guys think and I'll see what I can put together.

I'm in.

 

[Hear5Johnny]

I was just just about to order a bumper, the front, and transmission skid plates

It seems like you can't use a stock skid plate with this bumper, I could be wrong.

I'm curious as to the discount that we will be able to receive. I talked to a person there that said he would be able to offer some sort of discount if I ordered the skids and the bumper at the same time, Although I didn't ask how much...

Also the front skid doesn't cover the lca alignment bolt, which bothers me a little.

I'd be down for the gb.

 

[MStudt]

I was just just about to order a bumper, the front, and transmission skid plates

It seems like you can't use a stock skid plate with this bumper, I could be wrong.

I'm curious as to the discount that we will be able to receive. I talked to a person there that said he would be able to offer some sort of discount if I ordered the skids and the bumper at the same time, Although I didn't ask how much...

Also the front skid doesn't cover the lca alignment bolt, which bothers me a little.

I'd be down for the gb.

I working on the details. I've talked to the owner and we're trying to figure out what can be done. Give me till the end of the week and I'll have an answer.

 

[Quadsbc]

I really want one but not sure if I can swing it cash wise.

 

[GSPRunner]

99% in

 

[4Running Daily]

I'd consider it

 

[dirteater4]

99% in. Price pending.

 

[MStudt]

99% in

I'd consider it

99% in. Price pending.

Hoping to hear something today about the details.

 

[riflecountry]

Very interested.

 

[Ademb]

Thats a damn sweet looking bumper, not that I am in a position to jump on a purchase list at the moment though.

Will keep it in consideration!

 

[Andy in Pa]

I have been looking at other options for bumpers, and like this one the best so far. I am in pending one question... Can they allow for body lifts? I have a 1.5" BL.

 

[MStudt]

[MENTION=53337]SCRunner12[/MENTION], [MENTION=84917]GreenbowCounty[/MENTION], [MENTION=83647]Hear5Johnny[/MENTION], [MENTION=113726]Quadsbc[/MENTION], [MENTION=82154]GSPRunner[/MENTION], [MENTION=75445]4Running Daily[/MENTION], [MENTION=113851]dirteater4[/MENTION], [MENTION=109822]riflecountry[/MENTION]

See details below.

I have been looking at other options for bumpers, and like this one the best so far. I am in pending one question... Can they allow for body lifts? I have a 1.5" BL.

I waiting to hear back on the body lift question.

 

[MStudt]

All-Pro is going to do a forum special for us. This only applies the 3rd Gen's!

**Please note that some fabrication will need to be done in order to run this bumper. You WILL need to cut off 3" from the frame weld in their frame inserts. You'll also need to drill a couple holes to allow for bolting the bumper up. Instructions for this can be found here. This will show up exactly what needs to be done for the install.**

**All-Pro will modify the bumper in house prior to being shipped to you. This will allow for proper fitment.**

Regular pricing is as followed:

• Apex Bumper-$699
• LED Hoop- $75
• Center Hoop- $75
• Full Hoops- $200
• Large & Small Skid Plate- $199
• Large IFS Skid Plate- $129
• Small Transmission Skid Plate- $79

Our forum special is going to be 15% the bumper. The hoops will be regular price unless you're wanting to weld them on yourself. If you chose to weld them on yourself a discount will be given on them. There will not be a poweredcoating option for this special. All-Pro currently have 15 bumpers in stock which mean no lead time at this point.

*****PM ME FOR THE DISCOUNT CODE TO BE USED*****

Discounted pricing: 10/30-11/28

• Apex Bumper- $595
• LED Hoop- welded on $75; unwelded $64
• Center Hoop- welded on $75; unwelded $64
• Full Hoops- welded on $200; unwelded $170
• Large & Small Skid Plate Combo- $170
• Large IFS Skid Plate- $110
• Small Transmission Skid- $68

Flat Rate Shipping

• Bare bumper shipped UPS is $75
• Bumper with hoops is $153

Links
****Apex Bumper****
****Frame Modification****
****Skid Plates****

Here you can see what the LED hoop looks like. The hoop will allow for up to a 20" light bar. Both single and double row will work.

Here is the center hoop with the full hoops on the side. This center hoop come with 2 mounting tabs for lights.

A couple more of the bumper.

 

[Coopsdaddy]

Can I get this without the logo cut in it?also is the shipping going to be reasonable.
Oklahoma

 

[GreenbowCounty]

I'm in

[MENTION=98153]MStudt[/MENTION] Thanks for negotiating this. Been going back and forth for a while waiting on Black Friday but at this price that's a solid deal. Now just to figure out shipping. Interested in an unattached bar as well.

 

[MStudt]

Can I get this without the logo cut in it?also is the shipping going to be reasonable.
Oklahoma

If you get the bare bumper it can ship regular UPS. Once you add on the hoops it can not. All-Pro can give you an exact shipping rate though. With the logo, you might want to ask All-Pro as well.

[MENTION=98153]MStudt[/MENTION] Thanks for negotiating this. Been going back and forth for a while waiting on Black Friday but at this price that's a solid deal. Now just to figure out shipping. Interested in an unattached bar as well.

Shipping with the hoop unwelded might be cheaper since they'll go regular UPS.

 

[SCRunner12]

Hmm let me look into my finances and get back to you. Any idea what shipping is roughly? I'd imagine at least 100.