Bandit Runner's Build Thread

MStudt said:
I would agree.

Forums are a great resource, but many are just tired of all the bs that comes with them. Once you sellout, add pop-ups, more rules, membership fees, and so on. People just loose interest or find an alternative.

I wish this forum could go back to 3-4 years ago when things were good.

Mike
Click to expand...

This is where I just don't understand people.
I'm using adblock, and honestly am not bothered by ads whatsoever.
Furthermore, I was born squarely in the middle of the "Facebook" generation, but I won't touch that pile of shit unless I have too. Forums are hands-down the best place for storing and finding information.
I haven't seen one interesting build on Facebook, Instafam, or whatever else the cool kids are using nowadays. The critical failure is the inability to build a cohesive timeline of posts so people can see a nice evolution of discussion happen.
I agree that it was probably a better place a few years ago (before instagram), but I refuse to let that kill the forums. If nothing else, I'll just have to be the change I want in the forums.
 
Quantumkiwi said:
This is where I just don't understand people.
I'm using adblock, and honestly am not bothered by ads whatsoever.
Furthermore, I was born squarely in the middle of the "Facebook" generation, but I won't touch that pile of shit unless I have too. Forums are hands-down the best place for storing and finding information.
I haven't seen one interesting build on Facebook, Instafam, or whatever else the cool kids are using nowadays. The critical failure is the inability to build a cohesive timeline of posts so people can see a nice evolution of discussion happen.
I agree that it was probably a better place a few years ago (before instagram), but I refuse to let that kill the forums. If nothing else, I'll just have to be the change I want in the forums.
Click to expand...

I have no issues with this forum or any other forum, but I know others have cried about the ads before.

The thing about this forum that kills me is the lack of ability to perform a search, but that's always been an issue. Aside from that, this forum has been fantastic for myself, and others. I love the fact that so many members are willing to help, and post about their projects. Offer a garage to work if need be, and a couch to sleep on if you're broke down.

Mike
 
How have I never commented on this thread?? I read it all the time haha.

It's awesome to see you design and execute all the custom pieces. The creativity is awesome.
 
Fishwerks said:
How have I never commented on this thread?? I read it all the time haha.

It's awesome to see you design and execute all the custom pieces. The creativity is awesome.
Click to expand...

Wait? I didn't know you were in NM.
Hmmm, there's more of us.
I think we need to drag [MENTION=44220]BigFishAllDay[/MENTION] out of his hidey hole and go wheeling somewhere.
 
I find myself referencing t4r.org all the time with our local FB group. If anything it’s a historical document and reference material you really can’t find anywhere else. Quite honestly I don’t notice the ads, maybe cause it’s everywhere I’ve tuned it out? I like Instagram cause it’s impersonal if that makes sense. I’ve found more and more it’s better that way with digital media.


Sent from my iPhone using Tapatalk
 
TCMach said:
No need to dream! You've got more BL than I do and you're already geared (i think?) just get sawzall out!
Click to expand...

Yes, regeared to 5.29's. But I'd also have to use the sawzall to cut out a taller opening for the garage door. lol My truck's height is right at the limit now with the 35's and tall 861 rear springs.
 
Bandit Runner said:
Yes, regeared to 5.29's. But I'd also have to use the sawzall to cut out a taller opening for the garage door. lol My truck's height is right at the limit now with the 35's and tall 861 rear springs.
Click to expand...

Ahhh I see. I haven't had that problem in years, my only limiting factor is when it rains and my jack stands start to sink into the dirt :redbrick:
 
Finished up my custom gauge pod install for boost and AFR gauges. I sanded the 3D printed part smooth and spray painted it gray. The color didn’t match the interior exactly, but close enough for me. The gauges are just a slip-fit into the pod. I modeled some ribs into the pod openings to create a snug fit with the gauges.
z49Vzbk.jpg


Cut an opening in the A-pillar panel for the wires to run through (not shown in pic), and used double sided foam tape to adhere the gauge pod to the interior panel.
MmSpyFk.jpg


Ran the wires through the panel and pod, connected them to the gauges, and pressed the gauges into the pod openings. Popped the interior panel back into place with the pod and gauges on it.
e6RnlXh.jpg


GY9JbjD.jpg


QbMn0Cd.jpg


I really like the way it turned out. The location of the gauges is just right for me. I like them down lower by the dash and not up higher on the A-pillar for that “in your face” feeling, which I feel would be very distracting.
 
Love the gauge pod! Much cleaner than the ones that are available aftermarket. Would you consider sharing the print files for it? (for $ of course)
 
eimkeith said:
Looks great!
Click to expand...

sandracer33 said:
Love the gauge pod! Much cleaner than the ones that are available aftermarket. Would you consider sharing the print files for it? (for $ of course)
Click to expand...

TCMach said:
I was about to say the same thing. Looks fantastic and I may need one of these soon...
Click to expand...

Last Man Standing said:
Absolutely amazed at your talent and what a classic design.
Click to expand...

Thanks guys! Much appreciated. I think I will give the file away for free to anyone who wants to build one for themselves. Consider it a thank you to everyone on a great forum, where you're all always willing to help out.

If anyone wants the print file for the gauge pod, just PM me with your email address, and I will send it to you.
 
Bandit Runner said:
Thanks guys! Much appreciated. I think I will give the file away for free to anyone who wants to build one for themselves. Consider it a thank you to everyone on a great forum, where you're all always willing to help out.

If anyone wants the print file for the gauge pod, just PM me with your email address, and I will send it to you.
Click to expand...

Can you alter this to a 1 gauge pod?

Mike
 
Small update: I finally got the 2.2” pulley installed on the supercharger. Went from about 6.5 psi boost to about 8.0 psi. Also finished installing the 7th injector kit. Definitely need to do some tuning, so I’m looking into that.

Also finished up a small project. I had a store-bought dog-barrier thingy in the truck for several years, but it never fit quite right, and it was starting to fall apart. So I decided to make one from scratch. Got some flattened expanded metal, and sandwiched it between 2 layers of 1/8“ steel perimeter pieces. Then welded the outer perimeter all around.

It uses threaded rod and large 3” long hex nuts to tighten it up against the roof. The bottom ends of the threaded rod fits into pockets on top of my custom cargo box, which also prevents them from turning while screwing the nuts. The nuts raise and lower the whole barrier. Super easy to install and remove, no tools required and takes less than a minute. Painted it gray to match the interior.

rJDunHO.jpg


Installed:
SUuua4P.jpg


Dog approved:
bHUYtWO.jpg


I’m really happy with how it turned out. It fits really good, and looks nice too.
 
You must log in or register to reply here.

Members online

Total: 175 (members: 1, guests: 174)

Forum statistics

Threads
278,309
Messages
3,554,071
Members
248,016
Latest member
Advally Service

Share this page

Trending content

Back
Top