Best Source For 2020 TRD Pro (Heritage) Grille

I bought mine from McGeorge Toyota online parts. Not sure what the current price is now but I believe it was 35% off list and I had the parts within a week.

Stick with the OEM. They fit perfectly. You won’t have to dremel around the sensor like others have with the knock off garnish.

71a32a2f33904db4fecdd2e72a3da7fa.jpg



Sent from my iPhone using Tapatalk
yep, thats where I got mine... $430 to the door had it in about 4 days:cheers:
 
Except for the notch on the garnish for the sensor, does the upper part are any different from the 2019?? I want to install a 2019 on a 2020 trd off-road and only found 2019 parts, don't want to buy OEM ($$$$$$$$$$$)
 
I installed a 2019 grille on my 2020 with no issues at all... [emoji2371]


Sent from my iPhone using Tapatalk
 
2019 grille fit fine on my 2020, I didn’t have to cut around the bottom pre collision sensor like other people did.
..
4553d5491afc9d3e8e16a11d23ba3303.jpg



Sent from my iPhone using Tapatalk
 
2019 grille fit fine on my 2020, I didn’t have to cut around the bottom pre collision sensor like other people did.
..
4553d5491afc9d3e8e16a11d23ba3303.jpg



Sent from my iPhone using Tapatalk

Did you use a 2019 upper grill too? Did you have to modify the bracket up top to get it to fit at all? I'm aware that the bracket up top may be different lengths and the clips might not be in all the right places.
I have a 2019 replica upper and grill coming in soon and just wanted to be prepared as to how people got it to fit.
 
2019 grille fit fine on my 2020, I didn’t have to cut around the bottom pre collision sensor like other people did.
..
4553d5491afc9d3e8e16a11d23ba3303.jpg



Sent from my iPhone using Tapatalk

And for the top part, everyone say that the bracket is different, does it need some cutting?
 
And for the top part, everyone say that the bracket is different, does it need some cutting?

The upper grill is completely reconfigured. This applies to a 2018 Pro grille installed on a 2020 ORP. Only 4 of the 6 screws are in the same place, and the support bracket that ties back to the radiator support is entirely different. I have it installed, and it "works", but I also have the correct part on order so as to make it right. I'll take photos of the two when the correct part arrives and I swap it out.
 
Did you use a 2019 upper grill too? Did you have to modify the bracket up top to get it to fit at all? I'm aware that the bracket up top may be different lengths and the clips might not be in all the right places.
I have a 2019 replica upper and grill coming in soon and just wanted to be prepared as to how people got it to fit.

I did not modify the top bracket at all. It fit fine for my 4runner. A lot of people say they had to cut the bottom portion to allow the pre-collision sensor but I just fit mine in front and it was an exact fit. I used a 2019 OEM grille not a replica but it still saved me $200 vs. the 2020 grille
 
I did not modify the top bracket at all. It fit fine for my 4runner. A lot of people say they had to cut the bottom portion to allow the pre-collision sensor but I just fit mine in front and it was an exact fit. I used a 2019 OEM grille not a replica but it still saved me $200 vs. the 2020 grille

Where did you get your 2019 grille?
 
Are there any better deals on the '20 TRD Pro (Heritage) Grille parts?

Below are a few links to the proper '20 part numbers along with discounted prices; however, there has to be better deals out there:

Garnish Front Bumper PZ323-35058 | Boch Toyota South

Grille Radiator Up PZ327-35056 | Boch Toyota South

The below post from [MENTION=407981]snowpeak[/MENTION] on another thread includes another location w/ similar prices and helpful info on this application:

Hey all,

I am looking at changing the look of my 2020 TRD ORP by giving it the Pro look. Can you guys verify the two parts below and let me know what the part numbers are for the front and rear valances? Also, any recommended sites to purchase these at a decent price would be appreciated as well.


1. The Garnish Front Bumper PZ323-35058 is the actual TOYOTA bar? (see picture below)

2. The Grille Radiator Up PZ327-35056 is the replacement grill above the TOYOTA bar. (see picture below)

3. What is the part number for the front valence?

4. While I am at it :). What is the part number for the rear valence?

Thanks
Colt
 

Attachments

  • TRD Pro Front Grill.jpg
    TRD Pro Front Grill.jpg
    41.7 KB · Views: 3,860
Last edited:
Hey all,

I am looking at changing the look of my 2020 TRD ORP by giving it the Pro look. Can you guys verify the two parts below and let me know what the part numbers are for the front and rear valances? Also, any recommended sites to purchase these at a decent price would be appreciated as well.


1. The Garnish Front Bumper PZ323-35058 is the actual TOYOTA bar? (see picture below)

2. The Grille Radiator Up PZ327-35056 is the replacement grill above the TOYOTA bar. (see picture below)

3. What is the part number for the front valence?

4. While I am at it :). What is the part number for the rear valence?

Thanks
Colt

Colt,

Your current drawing is correct.

1. Garnish is the plastic overlay that has the word TOYOTA centered w/ raised plastic letters.

2. The TRD PRO Grille radiator upper piece replaces the current TRD ORL piece.

3. OEM Toyota Black TRD Valance Front: 53901-35250

4. OEM Toyota Black TRD Valance Rear: 52169-35120

Below are the beat prices I’ve found for OEM parts. Shipping varies, so recommend you compare each of them:

OEMpartstoyou.com
McGeorge Toyota Parts
EB Boch Toyota Parts
Bam wholesale parts

Good luck!
 

Members online

Forum statistics

Threads
278,316
Messages
3,554,113
Members
248,016
Latest member
Advally Service

Trending content

Back
Top