Bilstein TRD Pro suspension kit on sale PTR13-35140

[rihavens]

Ordered 3/8 and delivered 3/12. No VIN requested. No issues. Kit appears to be complete. I will have to wait a bit to do the install... need it to warm up some more...

Where from?

 

[cicio]

This kit essentially lifts the front to level, no need for either.

Thanks for responding.


And for anyone who has installed this kit, do you guys have any weight-related problem? I am looking to install this on a Lexus GX which is 500lb heavier than 4runner and 1000lb heavier than FJ.

 

[trick18]

Installed my kit last night, it was not as easy as I thought it was going to be. 1st side was a B#$%, the 2nd went a little easier once I figured out how to do it. Driving it this am I notice a clanging sound when I went over bumps at slow speed. Could it be because of the alignment? I will take another look at it tonight.

 

[crossfire190]

Mind sharing where you ordered from? Ordered a kit on 3/1, provided VIN, still waiting...

Bochtoyotasouth

Sent from my SM-J700P using Tapatalk

 

[VmaxEngage]

After a few hundred miles on the kit everything is still great. No issues at all. Aligned perfectly with caster pushed out so the bumper had to get trimmed.

Can't find my tape measure but it looks like the KDSS may have leveled itself out.

 

[WabdaQ]

After a few hundred miles on the kit everything is still great. No issues at all. Aligned perfectly with caster pushed out so the bumper had to get trimmed.

Can't find my tape measure but it looks like the KDSS may have leveled itself out.

What tire size are you running?

 

[VmaxEngage]

What tire size are you running?

stock 265/70/17 in terra grappler G2

 

[Ronark]

Shipped!!!

Ordered mine from Olathetoyota on 2/24 for $487.05 plus shipping. Just got confirmation that mine has shipped. I ordered before they started asking for a vin number. Good luck to everyone trying to order one.

 

[WabdaQ]

Mine just arrived today! Ordered 3/7 through Elmhurst Toyoto on EBay. No VIN, no hassle.

Sent from my SM-N950U using Tapatalk

 

[Akkording]

Will from OT did mentioned a 2 weeks delay on my order.

 

[dirtysouthjacket]

Ordered mine from Olathetoyota on 2/24 for $487.05 plus shipping. Just got confirmation that mine has shipped. I ordered before they started asking for a vin number. Good luck to everyone trying to order one.

I ordered same day and price and just got a shipping notification today as well. Supposedly have it Thursday. Might be able to get it on Sunday!

 

[Olluke]

Just got my kit! Ordered the evening of 2/23 from Olathe. They were supposed to be delivered on Saturday 3/10 but my roommate was asleep (thanks bud) anybody have a part number for OEM Toyota or compatible top hats? I skimmed back over the thread but didn't find anything...

 

[Diablo6]

Just got my kit! Ordered the evening of 2/23 from Olathe. They were supposed to be delivered on Saturday 3/10 but my roommate was asleep (thanks bud) anybody have a part number for OEM Toyota or compatible top hats? I skimmed back over the thread but didn't find anything...

There’s an amazon link for a KYB top hat a few pages back but seems like most are just leaving stock top hat inplace and using the “no spring compressor” method to remove shock and spring and the top hat stays bolted in place. I plan I’m doing that Sunday.

 

[Olluke]

I'll look into the

There’s an amazon link for a KYB top hat a few pages back but seems like most are just leaving stock top hat inplace and using the “no spring compressor” method to remove shock and spring and the top hat stays bolted in place. I plan I’m doing that Sunday.

I'll look into the no compressor method thanks!

 

[toforu10]

Finally arrived! VIN was required for my order to process. Provided the VIN courtesy of Craigslist[emoji23]

My kit did not come with the rear springs. So do I use my stock ones?


Sent from my iPhone using Tapatalk

 

[spigot1999]

Finally arrived! VIN was required for my order to process. Provided the VIN courtesy of Craigslist[emoji23]

My kit did not come with the rear springs. So do I use my stock ones?


Sent from my iPhone using Tapatalk

That is my understanding. I ordered this kit from Toytec and am going to install at the same time when my TRD kit arrives.

Toytec lift kit for TRD Pro 4Runners

 

[pbstriker38]

Just got my kit! Ordered the evening of 2/23 from Olathe. They were supposed to be delivered on Saturday 3/10 but my roommate was asleep (thanks bud) anybody have a part number for OEM Toyota or compatible top hats? I skimmed back over the thread but didn't find anything...

https://www.rockauto.com/en/parts/kyb,SM5640,strut+mount,7600

Same one from Amazon for a bit cheaper.

 

[trick18]

Original height from the center of the hub to the fender was RF 20" LF 19.5", after install they are RF 21" LF 20.5"(both clips on top setting)

Nose dive is much improved and the over all ride is a lot better, still have the clunking noise at slow speeds over certain bumps. I was hoping after it was aligned it would go away.
My guess is its the sway bar but haven't had time to look into it.

 

[spigot1999]

Original height from the center of the hub to the fender was RF 20" LF 19.5", after install they are RF 21" LF 20.5"(both clips on top setting)

Nose dive is much improved and the over all ride is a lot better, still have the clunking noise at slow speeds over certain bumps. I was hoping after it was aligned it would go away.
My guess is its the sway bar but haven't had time to look into it.

Did you have any lean having the clips on the top setting?

 

[sharky]

Finally arrived! VIN was required for my order to process. Provided the VIN courtesy of Craigslist[emoji23]

Wow never thought of that haha.

If people are still looking, partscontainer on eBay is selling them without needing a VIN. Apparently they have a bunch in inventory. You do pay a little more though.