Bought a damaged 2014 4runner SR5

[Blck14runner]

Try a zero point calibration, if you have downhill assist calibrate it also. My trac light wouldn’t go off after I put bilsteins on. For some reason sometimes the vehicle thinks it’s not equipped with downhill assist/crawl control when it is.

I haven’t tried it yet but there is a few different ways I found idk which one goes for the 4Runner?

 

[flea1983]

I haven’t tried it yet but there is a few different ways I found idk which one goes for the 4Runner?

Here is the procedure for the 4runner, in this thread:

http://www.toyota-4runner.org/5th-g...celeration-sensor-zero-point-calibration.html

If you don't do the downhill assist also, it probably won't turn it off. It didn't on mine till I did that.

 

[LeeBoatright]

How's it titled? Salvage / Rebuilt?

 

[Blck14runner]

Here is the procedure for the 4runner, in this thread:

http://www.toyota-4runner.org/5th-g...celeration-sensor-zero-point-calibration.html

If you don't do the downhill assist also, it probably won't turn it off. It didn't on mine till I did that.

Thanks I’ll give it a try, seems like it has downhill assist

 

[Blck14runner]

How's it titled? Salvage / Rebuilt?

It’s a reconstructed, kinda like rebuilt just what Oregon calls it

 

[flea1983]

Thanks I’ll give it a try, seems like it has downhill assist

It should, mine is in the overhead controls.

 

[A10MileHusker]

Awesome! I'm in Beaverton and hope to see you around!
Here is my rig

 

[Blck14runner]

It should, mine is in the overhead controls.

There’s like three of them, traction, a-trac, downhill

 

[Blck14runner]

Awesome! I'm in Beaverton and hope to see you around!
Here is my rig

Looks nice, where did you get the sliders? Locally?

 

[flea1983]

There’s like three of them, traction, a-trac, downhill

Yeah, same as mine. I had my buddy at the Toyota dealership do a zero point calibration, and then a downhill assist calibration and the dac calibration is what took my light off. Not sure if you have to do the zpc first or not, but it only takes a minute anyway.

 

[A10MileHusker]

Looks nice, where did you get the sliders? Locally?

Yep, got them from MetalTech. They are out of Newberg. Great company with some great work. Check them out Here

 

[Blck14runner]

Yeah, same as mine. I had my buddy at the Toyota dealership do a zero point calibration, and then a downhill assist calibration and the dac calibration is what took my light off. Not sure if you have to do the zpc first or not, but it only takes a minute anyway.

I did it myself took a few try’s but it worked, thx

 

[Blck14runner]

Yep, got them from MetalTech. They are out of Newberg. Great company with some great work. Check them out Here

Ok thanks, I’ll have to go check them out sometime

 

[A10MileHusker]

Ok thanks, I’ll have to go check them out sometime

Great guys! The sliders I have are the OPOR version and I really like them.

Let me know if you have any questions regarding them!

Sent from my SM-N950U using Tapatalk

 

[flea1983]

I did it myself took a few try’s but it worked, thx

You’re welcome man, glad I could help!

 

[Blck14runner]

Removed the front mid flaps and trimmed the front bumper, also installed 1” spacers and painted the rims black

 

[Blck14runner]

Why do the photos upload side ways?!?

 

[LandCruiser]

 

[Venture4R]

Awesome job!

 

[renau001]

Late reply. But major respect. Renting a paint booth even. Didn’t even know such things could be done DIY.