Bushwacker Fender Flares

[t-man]

For my self i am using a custom fj 8 inch lift i love the ride of it

What kit is that? Have a link?

 

[st1bn7]

What kit is that? Have a link?

Direct on rought country website buy the 6 inch lift kit from the fj cruiser and after add coil spacer and voila !

 

[t-man]

Direct on rought country website buy the 6 inch lift kit from the fj cruiser and after add coil spacer and voila !

Gotcha, that was the kit I was going to buy. My Bilsteins are adjustable so I could get more lift that way.
Radflo and icon make extended coilovers for that kit to get rid of the spacers too.
There's a couple threads on here about that specific kit.

 

[st1bn7]

Gotcha, that was the kit I was going to buy. My Bilsteins are adjustable so I could get more lift that way.
Radflo and icon make extended coilovers for that kit to get rid of the spacers too.
There's a couple threads on here about that specific kit.

yah i knoe but for the moment the front of my rider is okay ! i only have a 3inch coil spacer ! because i have 3inch shock so i for the suspenstion i will more look to change my track bar and rear arm for more sweet comform ride !

 

[Fusious]

Extreme thread revival! It's 2017 now and still nothing. There has to be something we can do. There's not one person on this forum that knows bushwacker or anyone else on a more personal level? I'm sure we could easily get a group buy going.

 

[Inv4drZm]

Someone should mock these ones up on their 4th gen. They are in Norman OK.

https://oklahomacity.craigslist.org/pts/6112308481.html

 

[Fusious]

Someone should mock these ones up on their 4th gen. They are in Norman OK.

https://oklahomacity.craigslist.org/pts/6112308481.html

Those don't look much different than 06-09 flares. Slightly bigger, but not by much. I want to grab fiberwerx or something of that nature fronts, but I also would like to match something with the rear?

Something of this nature.

 

[Inv4drZm]

I was thinking about this Bushwacker flare thing and have come to the conclusion it won't ever happen, for a reason I don't think that has been brought up yet.

Every 4th gen has plastic cladding on the doors, but the rear door's plastic cladding is part of the fender over the wheel well meaning you would have to trim the plastic cladding and blend it into an aftermarket flare, or the flare would need to incorporate the side cladding increasing cost substantially.

5th gens don't have the side cladding, and non-limited 3rd gens don't either which is why they get the bushwacker flares.

 

[pjku79]

I was thinking about this Bushwacker flare thing and have come to the conclusion it won't ever happen, for a reason I don't think that has been brought up yet.

Every 4th gen has plastic cladding on the doors, but the rear door's plastic cladding is part of the fender over the wheel well meaning you would have to trim the plastic cladding and blend it into an aftermarket flare, or the flare would need to incorporate the side cladding increasing cost substantially.

5th gens don't have the side cladding, and non-limited 3rd gens don't either which is why they get the bushwacker flares.

I agree with this comment. It is not a simple enough mod for them to mass produce. Unfortunately, cause I really want some.

 

[JJJack]

Anything new with regard to flares for a 4th gen?

 

[rican_4runner]

I came across this thread as i am looking for a fender flare solution for my faded ones. Seems this was abandoned.

 

[Aspen3399]

Just got a 2007 sr5 4runner and figured out there is no fender flares for it lol
Does anyone know if other Toyota vehicles are compatible with the 4th gen, such as the Tacoma or 5th gen. Even if I have to modify that would not be an issue for me.