Can't get crawl control to engage

[TrailPJ]

I took my new to me 2010 Trail Edition out to play with the 4wd systems. I was able to get the e-locker, terrain management, and a-trac to work fine.

I could not get the crawl control to turn on though. In 4-Lo, I press the crawl control button and nothing happens, no lights or anything.
Is there something I'm missing? According to the book, it just needs to be
in 4-Lo.

Thanks!

 

[Jeremy556]

Start checking fuses.

Some/many here will decry it, and I too, very rarely fuss with it. However, there have been circumstances when CRAWL got me through something when the rear locker, ATRAC, and a gentle throttle failed. All were very deep, dry, well packed snowfall.

 

[1000MPH]

It won't work with the dif locked or atrac on. Was your foot on the brake?

 

[Intruder]

It won't work with the dif locked or atrac on.

Pretty sure it will. You may be thinking of multiterrain select.

 

[TrailPJ]

The e-locker and Atrac were not engaged when I was testing. I believe my foot was on the brake, but I may have not been holding my mouth right. LOL!!

I'll take it out again later and walk through the steps and report back.
Thanks!

 

[FERAL 4R]

Make sure you're not in Park or Neutral when activating.

 

[1000MPH]

Pretty sure it will. You may be thinking of multiterrain select.

Probably. One word of warning for the OP: Try the highest speed setting first. The lowest is no fun on level ground. Don't say I didn't warn you.:bluejump:

 

[Hellamatic]

Probably. One word of warning for the OP: Try the highest speed setting first. The lowest is no fun on level ground. Don't say I didn't warn you.:bluejump:

Especially if you're trying to show off your fancy new ride to a lady.....embarrassing....

 

[TrailPJ]

I got it to work last night. It has to be in D and have your foot on the brake.
And yes, the lowest setting on level ground is quite entertaining!

Thank you for all the replies!!