CBI 4th gen Hybrid rear bumper

The bumper is up on the site! There are also a few pictures out of the bumper with the swing arm on it. Its on the 4wd magazine 4runner.
 
shallcallhimtim said:
The bumper is up on the site! There are also a few pictures out of the bumper with the swing arm on it. Its on the 4wd magazine 4runner.
Click to expand...
Thanks for the update! Did you ever figure out if it improves the departure angle and by how much? Given that the cbi full plate bumper doesn't improve the angle much (esp at the corners) I don't expect much but still curious!
 
HokieRunner said:
Thanks for the update! Did you ever figure out if it improves the departure angle and by how much? Given that the cbi full plate bumper doesn't improve the angle much (esp at the corners) I don't expect much but still curious!
Click to expand...

I did! Sorry I didn't post it. Im not sure what I did with the numbers but to get to the point the departure angel is only about an inch greater. It doesn't wrap under the cross member like the plate so you do gain a little. The lowest point is the hitch though. At the corners the gains are crazy I don't measure it but if you look at it is even with the top of the cross member.
 
Last edited:
shallcallhimtim said:
I did! Sorry I didn't post it. Im not sure what I did with the numbers but to get to the point the departure angel is only about an inch greater. It doesn't wrap under the cross member like the plate so you do gain a little. The lowest point is the hitch though. At the corners the gains are crazy I don't measure it but if you look at it is even with the top of the cross member.
Click to expand...
Thanks for the update - I definitely appreciate it!
 
BlairB said:
I can't seem to find the pics of the bumper on the 4Runner. Have a link/care to post it? Thanks!
Click to expand...



This is the only one ive been able to find so far. If you guys find any more please post them up! That is just the basic swing arm they have so it should be the bumper on the site with the swing arm.
 
Last edited:
At first, I was not really interested in this hybrid... But, now, after seeing this pic, I am VERY curious. I hope more pics get posted because, this may be exactly what I am looking for!
 
preacher35 said:
At first, I was not really interested in this hybrid... But, now, after seeing this pic, I am VERY curious. I hope more pics get posted because, this may be exactly what I am looking for!
Click to expand...

I'll tell you man, for the price, weight and strength. There is nothing else out there like this for our rigs. If I ever get the truck back to Houston I'll let you take a look at it.
 
t-rex grrr said:
I like how it's light, but I too would like to see it plated. Like this ^^^ gent said, more pics, please!
Click to expand...

So far, I have seen three pics, and they ALL look like different bumpers. The most recent pic is ambiguous at best. I have no idea why someone at CBI cannot publish more pics of this bumper. Strange.
 
preacher35 said:
So far, I have seen three pics, and they ALL look like different bumpers. The most recent pic is ambiguous at best. I have no idea why someone at CBI cannot publish more pics of this bumper. Strange.
Click to expand...

Have you been to the first page? There are a ton of pictures of the bumper on and off the truck
 
Brutalguyracing said:
Maybe not many have it installed
I like the bumper but $350 for shipping is down right riduclus
Click to expand...

Well, I only need to see it on one 4th gen 4runner, but more images of said 4th gen 4runner as the one pic of it installed on the white 4th gen is a bit ambiguous. But, yes, while I haven't not calculated shipping on it myself, $350.00 is pretty damned high. To ship a Shrockworks rear bumper across the country is only about $170.00. Go figure.
 
preacher35 said:
Well, I only need to see it on one 4th gen 4runner, but more images of said 4th gen 4runner as the one pic of it installed on the white 4th gen is a bit ambiguous. But, yes, while I haven't not calculated shipping on it myself, $350.00 is pretty damned high. To ship a Shrockworks rear bumper across the country is only about $170.00. Go figure.
Click to expand...

truth everything is crazy expensive compared to my old tacoma bumpers
hell i got front and rearb bruteforce with hoops and swing outs for $1800 shipped
i cant even buy one bumper for the runner for that
 
Any chance we can we get a hybrid front that looks something like this?

uvaqa5um.jpg
 
You must log in or register to reply here.

Similar threads

R
Ironman Foam Cell Pro Setup Advice – 2009 4WD V8 4Runner
Replies
2
Views
375
alia176
A
N
WTB 4th Gen CBI,4x4 Labs or Victory Rear Bumper
Replies
1
Views
2K
fredliam
F
5VZ-FE
Tow Hitch fabrication for CBI Hybrid Rear Bumper
Replies
1
Views
1K
phattyduck
P
rpjtremblay
FOR SALE, OG 5th Gen 2013 4Runner Limited Overland Build, $22.5k, New Jersey
Replies
0
Views
2K
rpjtremblay
rpjtremblay
KwonRunner
FS: 4th Gen 2008 Toyota 4Runner V6 4WD – 194K – Modified – $25,900 OBO – NorCal
Replies
0
Views
132
KwonRunner
KwonRunner

Members online

Total: 8,036 (members: 2, guests: 8,034)

Forum statistics

Threads
278,316
Messages
3,554,120
Members
248,016
Latest member
Advally Service

Share this page

Trending content

Back
Top