changing front wheel bearings

[yota-runner]

My front left wheel bearing recently went out and im sourcing parts now. I plan on going to a shop to press them in and out unless i can find some good low mile spindles. As far as getting the spindle out are there any special tools i need aside from the usual sockets, rubber mallet, and screw drivers?

 

[Whiskey512]

You'll need a ball joint separator for the UBJ. The only other tool you'll need that may not be in the average tool box is a 35mm socket for the CV nut. It may be a 36mm depending on if the axles are OEM or aftermarket replacements. Happy wrenching!

 

[TXRick]

I didn't have a 35mm but 1 3/8 worked for me.