CMilViper's 2017 Cement 4Runner Build

I got my tablet mount completed for now, thanks to the info from [MENTION=166904]TerraCrawler[/MENTION].

The only think I did differently was using a longer arm, as well as using a Ram X-Grip holder...

http://www.toyota-4runner.org/5th-gen-t4rs/239998-terracrawlers-build-thread-3.html#post2804892


yFEbRkyh.jpg

If you ever get lost with that setup you will never hear the end of it! Looks awesome!
 
Summer 2018 Pictures

It's been a while since I posted.....So here are some pictures taken so far, from this summer. I'm looking forward to more good times later this summer & fall!

vbMmXM4h.jpg


GTqvRkIh.jpg


CxNRy0Ah.jpg


9oHioRMh.jpg


A0CQBXKh.jpg


qsdkOfyh.jpg
 
Nice Rig Viper!

My son and I see you parked in Lakewood all the time! We would love to get a closer look some time. I have a 2004 LMTD that I'm building and always looking for ideas!

Mark
 
My son and I see you parked in Lakewood all the time! We would love to get a closer look some time. I have a 2004 LMTD that I'm building and always looking for ideas!



Mark



I've seen that one several times parked at David Perry Miller.
Nice rig, but not the OP.


Sent from my iPhone using Tapatalk
 
Good to see that there isn't snow up there right now. We're headed to Moab next Friday and then swinging through Ouray on the way home.
 
Good to see that there isn't snow up there right now. We're headed to Moab next Friday and then swinging through Ouray on the way home.

Yeah, it was still pretty warm, compared to this time last year up there. I plan to head back again at the first part of October, and will run whatever trails are still open!

Have fun in Moab & Ouray, and post some pictures when you get back!
 
How'd you run your wires for roof lighting? Finally adding my rigid bar to the top after giving up on Gobi ever making the correct bracket for a Baja bar. Looking for ideas to get the wires run - just need to get them to my engine bay, since I'm running a switch pro.
 
How'd you run your wires for roof lighting? Finally adding my rigid bar to the top after giving up on Gobi ever making the correct bracket for a Baja bar. Looking for ideas to get the wires run - just need to get them to my engine bay, since I'm running a switch pro.

What's up K9 HAULR?.....I just ran the wiring down the driver's side windshield channel. I wrapped the wiring with just enough black electrical tape, to where you can securely just press it into the channel. It doesn't move. It also matches the black molding, so hardly noticeable. Good luck!
 
Good to see you back on the forum!... Still in the Tundra? Getting another 4Runner?

I ended up keeping the Tundra. I put some custom bumpers and aftermarket wheels and tires on it. I'll post a picture of it later this week. I still miss the 4Runner though. I like the 4Runner forum, the Tundra one is nearly non existent.

Do you still have your Viper?
 
I ended up keeping the Tundra. I put some custom bumpers and aftermarket wheels and tires on it. I'll post a picture of it later this week. I still miss the 4Runner though. I like the 4Runner forum, the Tundra one is nearly non existent.

Do you still have your Viper?

Awesome man, the Tundra sounds nice!

I actually sold the Viper a while back......If I were to get another one, it would have to be a 16-17 ACR! Unsure though, since we are thinking about getting out of Texas!
 
Ouray/Telluride - October 2018

I just got back from another trip to Ouray/Telluride!

It started snowing the night we drove in, and by morning, all of the great passes/trails were impassable.

We still had a great time, and did what trails we could....as well as spent some additional time in the great town of Telluride!

n8obtglh.jpg


ytFkZRhh.jpg


Ofwh6tMh.jpg


oqHH615h.jpg


yxFhZE6h.jpg


uCz0wEYh.jpg


Gzhn40Gh.jpg


6dcY2r2h.jpg
 
What's up K9 HAULR?.....I just ran the wiring down the driver's side windshield channel. I wrapped the wiring with just enough black electrical tape, to where you can securely just press it into the channel. It doesn't move. It also matches the black molding, so hardly noticeable. Good luck!

Which light bracket did you guys used for the light bar? Im giving up with Gobi too, they havent respond back
 
CBI Front Bumper/34'' Toyo MT's

It's been a while, but I just recently installed the CBI front bumper. The bumper is of very high quality, and CBI was right on track, as far as the lead time is concerned (about 12 weeks)....

I chose the amber Baja Designs Squadron Sports, along with their amber S-8 30'' light bar.
I plan on installing the winch, when I get some time here shortly (Warn Zeon 10-S).

I also went from the 285/70-17 Toyo MT's, to the 285/75-17's of the same tire. The diameter is 34.08''......
I plan on doing a re-gear, probably later on this year..... but it's really not too bad as it is, at least to enjoy the rest of this summer, and into fall.

mtKgj3Fh.jpg


ZLUBEjLh.jpg


X9IkqeKh.jpg
 
Last edited:
Suspension Update/IKamper

I recently updated the suspension.... as I took off the previous Icon non-resi. shocks. (I plan to rebuild these, in order to replace the same, aging Icon shocks on my wife's 2015 4Runner)

I upgraded the front & rear to Icon's Remote Reservoir w/ CDCV, along w/ 700lb springs.... to account for the earlier addition of the CBI front bumper, and winch going in soon..
For the rear, in order to keep about an inch of rake, I added small 15mm Dobinson's spacers on top of the existing 3'' Icon Overland springs. I have the Dobinson's 701V's in the garage on stand-by, but everything seems to ride well as is, for now.

I also picked up an IKamper Skycamp 4x in Denver, and camped solo for several days down in the San Juan mountains....Awesome time.
I am heading back to Silverton/Ouray next week with the wife and daughter, to hit more of the trails this time.....

72lAIsrh.jpg


8HMoHEnh.jpg


unNAsp1h.jpg


IiaRpqBh.jpg


i3KldGUh.jpg


5aXk8Coh.jpg
 
I'm just getting into T4Rs after picking up my 19 ORP. I have to say your build has been the best one I've seen in my time. Well done.

Curious with all the updates, why did you stick with the Pro rims? Like the looks?
 
I'm just getting into T4Rs after picking up my 19 ORP. I have to say your build has been the best one I've seen in my time. Well done.

Curious with all the updates, why did you stick with the Pro rims? Like the looks?

Thanks man!

As far as the Pro wheels, I've had no problem with them, and it hasn't really been a priority for me up to this point...........but new wheels have been entering my mind, more and more, over the last few months, so we'll see!
 

Members online

Forum statistics

Threads
278,312
Messages
3,554,089
Members
248,016
Latest member
Advally Service

Trending content

Back
Top