Daystar coil spacer questions

[mijbr90190]

Hey guys, got a couple questions about the mentioned lift. Its been a pain in the ass for me. So i get everything apart down to putting the spacer on the strut assembly and putting the top 14mm bolts in. Thats where my problem arises. I cant get the 19mm bolt through the strut because i cant compress the strut enough. I even tried the bottlejack trick to push down the control arms. Would dropping the lbj and sway bar end links benefit me anyhow? I need maybe 3/4 of an inch up and back for it to be bolted in. And does anyone happen to have pictures of said lift with 265/70's. Searched all over. Thanks.

 

[gotopless]

Hey man I know this is a video from a different brand but it is the same setup with a front coil spacer. It shows how they were able to easily able to remove the front coilover.

Rough Country's 3" Suspension Lift for Toyota 4Runner 90-95. Only! $249.95 - YouTube

 

[02_SE_Runner]

Put some elbow grease into eh? lol I took me a good hour to get one on, don't run impatient.

 

[mijbr90190]

Hey man I know this is a video from a different brand but it is the same setup with a front coil spacer. It shows how they were able to easily able to remove the front coilover.

Rough Country's 3" Suspension Lift for Toyota 4Runner 90-95. Only! $249.95 - YouTube

Sweet dude, that helped me a ton. I didnt loosen any linkages, so that probably would have saved a ton of frustration. Im gonna attempt it again tomorrow.

 

[Slow_T4R]

Unhooking the sway bar will help. Good luck!

 

[benedict1337]

should have just got the ome lift, we could have hit the trails by now.