Desert Dawg build...what a switch!

Thats great, any tips on mounting this way? Extinguisher type?

I thought the location was perfect within the indent of the molded plastic wheel well cover but I also didn't want to drill holes through it. So I just used 1-inch wide strips of 3M double sided tape; covered the entire backing of the mounting bracket and held in place for a couple of minutes. It is solid and not moving, but can remove or relocate if needed. Just make sure you clean the plastic well beforehand and wipe down with alcohol before applying the 3M tape.

I also didn't want too large of a fire extinguisher to save space and weight, so I opted for the smaller 1-lb dry chemical extinguisher. It is a MAXOUT with chrome finish.
 
Last edited:
I thought the location was perfect within the indent of the molded plastic wheel well cover but I also didn't want to drill holes through it. So I just used 1-inch wide strips of 3M double sided tape; covered the entire backing of the mounting bracket and held in place for a couple of minutes. It is solid and not moving, but can remove or relocate if needed. Just make sure you clean the plastic well beforehand and wipe down with alcohol before applying the 3M tape.

I also didn't want too large of a fire extinguisher to save space and weight, so I opted for the smaller 1-lb dry chemical extinguisher. It is a MAXOUT with chrome finish.
How much does it weigh? Consider it becoming a missile in the event of a crash.
 
How much does it weigh? Consider it becoming a missile in the event of a crash.

I agree, but the unit weighs less than 16 ounces, is secured with a metal strap, and trying to remove the bracket actually lifts the molded interior piece; it is very secure and a great way to try out a location. Even so, I would not mount it this way if one opted for the larger and much heavier units.

EDIT: if you know that would the final location, you can also simply drill two small holes into the plastic through the bracket holes and secure with self tapping or thread forming screws. I am thinking this might be where I want it mounted permanently but been waiting to see if I run into issues when loading up the cargo area with gear and such. If so, I also thought about moving it up into the tray on top of the wheel well cover as this fire extinguisher unit will lay flat inside of there and can tape/screw the mounting bracket in place.
 
Last edited:
I ended up sticking my fire extinguisher in that really odd cargo cubby on the other side. I wrapped it in a towel so it won't bang around.

Not a lot you can stick in there but the extinguisher fit pretty good!
 
I ended up sticking my fire extinguisher in that really odd cargo cubby on the other side. I wrapped it in a towel so it won't bang around.

Not a lot you can stick in there but the extinguisher fit pretty good!

I have a plastic "jar" of bungees in there, before that, a roll of paper towels. It is an odd little space...:vader:
 
I ended up sticking my fire extinguisher in that really odd cargo cubby on the other side. I wrapped it in a towel so it won't bang around.

Not a lot you can stick in there but the extinguisher fit pretty good!

I have a plastic "jar" of bungees in there, before that, a roll of paper towels. It is an odd little space...:vader:

I just put my weed there:biggrin2:

Playing cards, dominoes and a spare shirt.

I am PRETTY sure that's what she said


Too funny; I actually use that space to store my binoculars for when I am trekking around.
 
Last edited:
I was thinking about how I ended up with my current 4Runner which got me going down memory lane about my previous builds over the past 10 years, so thought it would be fun to show some of them leading up to my current 4Runner:

My 2004 Dodge Ram 2500HD Cummins 4x4:


My 2004 Tahoe Z71 4x4:


My 2004 and later 2006 VW Touareg V8 4x4:


My 2006 Range Rover Sport:


My 2007 F150 King Ranch 4x4:


My 2002 Jeep Sahara 4x4 for weekend fun:


My 2008 F150 XLT 4x4:


My 2008 F250 Superduty Powerstroke FX4:


My 2009 Ram 1500 Laramie 4x4:


My 2009 F150 FX4:


My 1973 Bronco HD 302 V8 that I restored for my wife (this was a long project...lol):


My 2011 F150 XLT EcoBoost 4x4:


My 2011 F150 Platinum 4x4:


My 2013 F150 EcoBoost FX4:


Our 4th Gen 2004 4Runner that I built for my kid and got me back on track...lol:


And final evolution to the 2014 4Runner Trail Edition which quite honestly has been my favorite thus far:
 
Last edited:
I was thinking about how I ended up with my current 4Runner which got me going down memory lane about my previous builds over the past 10 years, so thought it would be fun to show some of them leading up to my current 4Runner:

My 2004 Dodge Ram 2500HD Cummins 4x4:


My 2004 Tahoe Z71 4x4:


My 2004 and later 2006 VW Touareg V8 4x4:


My 2006 Range Rover Sport:


My 2007 F150 King Ranch 4x4:


My 2002 Jeep Sahara 4x4 for weekend fun:


My 2008 F150 XLT 4x4:


My 2008 F250 Superduty Powerstroke FX4:


My 2009 Ram 1500 Laramie 4x4:


My 2009 F150 FX4:


My 1973 Bronco HD 302 V8 that I restored for my wife (this was a long project...lol):


My 2011 F150 XLT EcoBoost 4x4:


My 2011 F150 Platinum 4x4:


My 2013 F150 EcoBoost FX4:


Our 4th Gen 2004 4Runner that I built for my kid and got me back on track...lol:


And final evolution to the 2014 4Runner Trail Edition which quite honestly has been my favorite thus far:

Dang Dawg...Do you eat these vehicles? That is quite a progression. Almost as many automobiles as my brother! LOL
 
Dang Dawg...Do you eat these vehicles? That is quite a progression. Almost as many automobiles as my brother! LOL

hehe...well, I actually did not show all of my trucks nor all the cars I had too (I could go on about my other Jeeps, Corvettes, BMWs, Minis, and so forth...lol); but these are the ones that sort of eventually inspired me towards the 4Runner (interesting that I tried the SUV route before and/or gave my trucks some SUV look/functionality) which is why I selected to show these. I think the 4Runner is the evolution in size, style, function, and all around capability that I have been searching for, hence my favorite!

Since you go through trucks so fast maybe i can buy your 4Runner for Christmas....:wave:

No, my wife already has dibs...lol...but thanks! :)
 
Last edited:
hehe...well, I actually did not show all of my trucks nor all the cars I had too (I could go on about my other Jeeps, Corvettes, BMWs, Minis, and so forth...lol); but these are the ones that sort of eventually inspired me towards the 4Runner (interesting that I tried the SUV route before and/or gave my trucks some SUV look/functionality) which is why I selected to show these. I think the 4Runner is the evolution in size, style, function, and all around capability that I have been searching for, hence my favorite!



No, my wife already has dibs...lol...but thanks! :)

cool.....so the Bronco will be on the block?...lol
 
Desert Dawg - Really love what you did to your rig! Outstanding man. I'd like to do the same roof rack, ladder and LED's. What would you charge me to fab some brackets as you did for your lights so that it'd be bolt-on ready? Possible?
Thanks!
 
Next time anyone tells me I go through vehicles a lot I am going to show them your post! LOL

Current T4R is probably my favorite too, thing is looking awesome for sure
 

Forum statistics

Threads
278,314
Messages
3,554,097
Members
248,016
Latest member
Advally Service

Trending content

Back
Top