Disable door chime ?

[Lost in trees]

Works on 2020! Thanks Old Red!

 

[Wandering Purcell]

On another forum I saw the photo of the plug, but it wasn’t a push button. Same or no?

Does this only stop the door chime? The dome lights, canbus, still recognize the door being opened?
Thanks fam!

 

[skag1T]

Just take out the door switch and unplug the wires from behind it, isolate the ends with shrink tape or elecrrical tape, and attach a string so you can access the wires in case you want to undo the whole thing later. then put back the switch - which will not be functional anymore. Quiet as a mouse.

 

[Jeremy556]

Does this only stop the door chime? The dome lights, canbus, still recognize the door being opened?
Thanks fam!

Everything works normally, except the chime

 

[glennwick3]

I took the front doors off of my 5th Gen 4Runner to enjoy the cool weather and want to turn off the door chime while I'm riding around.

I'm not sure what I'm missing here, but I can't seem to find the wire you guys are describing. I pulled each of the ones circled in the attached pic (one at a time), but neither stopped the chime. What am I missing?

 

[pcstockton]

That wire stops the chime from the keys in the ignition when door is open

 

[glennwick3]

Any idea why that's not working for me? I unplugged it and still getting the chime when I drive.

Is there a different chime that goes off when you try to drive with the door open?

 

[pcstockton]

Yes, that is a different chime. Who drives around with the doors open?

 

[HanginInUtah]

Yes, that is a different chime. Who drives around with the doors open?

You missed his comment about removing his doors?

 

[pcstockton]

You missed his comment about removing his doors?

I didn't miss it. I suppose I worded the question wrongly.

Why would you drive around without doors installed?? Seems like a silly/Jeepy thing to do.

 

[Ripper238]

I use just the right size peace of wood. Could probably make something perfect if I used it more.

 

[TQ 4runner]

Just take out the door switch and unplug the wires from behind it, isolate the ends with shrink tape or elecrrical tape, and attach a string so you can access the wires in case you want to undo the whole thing later. then put back the switch - which will not be functional anymore. Quiet as a mouse.

thanks for posting!