Eibach needs a stock TRD PRO in SoCal

blackbearry said:
What the difference between TSB and non-TSB springs?

Sorry I’m new.

Have a ‘21 Lunar Rock 4Runner and would like to get some more height with Eibach springs so I can fit 285s on there without a body Mount chop.


Sent from my iPhone using Tapatalk
Click to expand...

Mattolie is correct

be sure that you note that the TSB only applies to PRO trim 19-20 models.

You have a 21, so if it is a PRO, then you need need the after TSB model or a model designated specifically for the 21.

If is not a PRO, then none of this applies.
 
lewdog998 said:
Mattolie is correct

be sure that you note that the TSB only applies to PRO trim 19-20 models.

You have a 21, so if it is a PRO, then you need need the after TSB model or a model designated specifically for the 21.

If is not a PRO, then none of this applies.
Click to expand...


Thank you! Yes I have the 21 TRD Pro so I’ll need the after TSB springs.


Sent from my iPhone using Tapatalk
 
matoolie said:
On 2020 PRO's the bottom of the front springs are ground flat. The bottom of the front springs on the 2021 PRO's are not grounded flat. As a result the shock+spring assemblies are different part numbers.

Some owners of 2020 PRO's living in cold climates experienced noises from the front shocks. Toyota issued a Technical Service Bulletin (TSB) for these owners where Toyota will replace the 2020 front shock+spring assemblies with the new 2021 part numbers. As a result, 2020 PRO owners who have had the TSB service now have the same shock+coil assemblies used on 2021 PRO's
Click to expand...


Thank you! Yes I have the 21 TRD Pro so I’ll need the after TSB springs.


Sent from my iPhone using Tapatalk
 
mark@eibach said:
Yes, that is correct.



Yup, the NON-TSB springs are back in stock and ready to go! Right now it's showing the set of 4 is out of stock, but that is due to a packaging issue. You can order front and rear separately or give us a ring and speak to Tanner.


The new front springs are on the schedule for production, ETA is fourth quarter at the moment.
Click to expand...


Any idea when the ‘21 TRD Pro (after TSB) springs would become available?


Sent from my iPhone using Tapatalk
 
ILBEATU said:
Will these springs support the weight of an ARB bumper and winch??
Click to expand...

I too want to find out.Tried the search but nothing.
I have a set of TRD Foxes off a Pro on my FJ.
And with 200lbs bumper and winch, I get almost 1"sag at the front.
I hope it will bring it back up to 0.6 of an inch from stock?
 
Last edited:
mark@eibach said:
Code:

We do not have the raw material yet (late from distributor). We are doing what we can to have these in stock by Christmas.
Click to expand...

[MENTION=277772]mark@eibach[/MENTION]

Any more updates? We still on track for December ? Heard a recent rumor said March 2022.
 
You must log in or register to reply here.

Similar threads

C
Anyone running the Eibach Pro-Truck shocks on the stock ride height?
Replies
2
Views
2K
MDFI29
M
TrueNorth4Runner
Very specific lift question re: TRD PRO coils
Replies
2
Views
1K
TrueNorth4Runner
TrueNorth4Runner
B
Leveling a TRD Pro- just new shocks?
Replies
2
Views
8K
bluecollarjock
B
N
FS: 2006 4Runner V8 Limited 295k miles - $16,000 - Winston Salem, NC
Replies
1
Views
745
Neo
N
UtahSooner
First 5000 Mile Service = Oil Bath & 4 Scuffed TRD Pro Wheels! ARRGH!!!
2 3
Replies
42
Views
28K
UtahSooner
UtahSooner

Members online

Total: 539 (members: 3, guests: 536)

Forum statistics

Threads
278,316
Messages
3,554,111
Members
248,016
Latest member
Advally Service

Share this page

Trending content

Back
Top