Freshly installed by RPM Garage last weekend on my 2016 SR5 Premium. The ride is nice and firm. No more sagging brake dips...no more leaning body roll on turns. No more rubbing on my 265/75/17 Wildpeaks on 0 offset. front lift +2.75, rear lift +1 inch. I'm kicking myself for not having installed these earlier.
Eibach Pro-truck lift
- Thread starter f-it
- Start date
Ryan at Eibach
New member
Hey Fellas,
Springs get powder coated tomorrow!
Also, we're installing a kit here on Thursday with a new overload rear setup that is height adjustable for you guys carrying a ton of stuff. I'll post some pics
Ryan
Springs get powder coated tomorrow!
Also, we're installing a kit here on Thursday with a new overload rear setup that is height adjustable for you guys carrying a ton of stuff. I'll post some pics
Ryan
jtice
New member
I will also be installing a C4 Fab center section bumper and smittybilt winch. And I have some rock rails.
Curious if I should still set the front to the lowest position or one notch up?
I don't mind if it still has just a tiny little bit of rake. But I don't want the front end sitting higher than the rear that's for sure
Curious if I should still set the front to the lowest position or one notch up?
I don't mind if it still has just a tiny little bit of rake. But I don't want the front end sitting higher than the rear that's for sure
jeroweezy
New member
did you need to install any other things? uca? or just the eibach kit?
looks good! wish i lived near RPMgarage!
BP22
Member
Looks great! RPM will be installing mine as soon as I receive it.
Ryan at Eibach
New member
Springs are now coated and in stamping today. Almost there!
BP22
Member
Great. Thank you for the updates Ryan.
just the kit was installed
Steve stocks them. I'm sure his price is lower than anything we can find.
Ryan at Eibach
New member
In stock!!!
Before I get a bunch of PM's I have no way to track all of your orders. :thumb:
Thanks for your patience and post pics when installed.
Ryan
Before I get a bunch of PM's I have no way to track all of your orders. :thumb:
Thanks for your patience and post pics when installed.
Ryan
Awesome! Now get those things out to ToyTec so mine can get here!
Ryan at Eibach
New member
It's 4 shocks and 4 springs.
Thanks for pointing that out. it's being changed right now.
Ryan
Lostmanifesto
New member
Is this a replacement coil that goes into the existing factory coilover? I am trying to get a handle on what this thread is about but 20 pages deep and its all over the place haha. I have a 19PRO and I am trying to find out if anyone is making new coils for the PRO front coilovers to bring the truck level. Eibach maybe?
Thanks
Ryan at Eibach
New member
Ryan at Eibach
New member
We do not at the moment.
hwnrunner
New member
you're welcome!
Now to find the best deal on this kit... Toytec?
Ryan, whats the ship weight of the kit, your site is showing over $330 to ship Hawaii. yikes!
Last edited:
Check Dobinsons
Dobinsons Front Lifted Coils for Toyota 4Runner TRD Pro - Dobinsons Direct
Just double check if that works with the fox shocks...they are probably for the Bilstein's that came on older pros.
Last edited:
Ryan at Eibach
New member
Weight-lbs: 99.21 Box#: 5 LxWxH: 30.125 x 19.625 x 9.000
FourGunner
New member
Indeed! CA taxes suck...it'll be great to find a deal out of state with free shipping!
Similar threads
