Eibach Pro-truck lift

[19TRDPRO]

Ryan are you guys making front springs that are compatible with 19 TRD PRO 4R Fox Shocks?

 

[Ryan at Eibach]

Ryan are you guys making front springs that are compatible with 19 TRD PRO 4R Fox Shocks?

Yes, they are in the works.

 

[jcalvert86]

Thanks for the suggestion :thumb::thumb:

I would second his suggestion - 1.5/1 or 1.75/1 over the stock Pro height is ideal for me - retains just the slightest bit of rake, which means I can put a bit of crap in the back for trips without getting reverse rake.

 

[19TRDPRO]

Thanks Ryan

 

[Ryan at Eibach]

We want to double check a couple numbers on a PRO. Anybody local to Corona/OC/Roverside have one with Fox suspension that could swing by for a quick measuring session and FREE lunch?

 

[papadop88]

We want to double check a couple numbers on a PRO. Anybody local to Corona/OC/Roverside have one with Fox suspension that could swing by for a quick measuring session and FREE lunch?

For the love of god, someone PLEASE get a 19-20 Pro over to Ryan to get those measurements. Faster ya'll do this, the fast we can get our springs. :becky:

Ryan, I would do it cuz I'm in the SFV, but I don't have my truck yet. En route...

 

[Ryan at Eibach]

For the love of god, someone PLEASE get a 19-20 Pro over to Ryan to get those measurements. Faster ya'll do this, the fast we can get our springs. :becky:

Ryan, I would do it cuz I'm in the SFV, but I don't have my truck yet. En route...

Yes, please do!

Based on a lot of your feedback we might make a couple small tweaks.

 

[jcalvert86]

Sounds like Eibach needs to move to TX.

Wouldn't take a month for someone to bring you a truck to measure.

If you don't absolutely need it in your shop, you're welcome to come to Dallas area and use mine for a day or two.

 

[papadop88]

Yes, please do!

Based on a lot of your feedback we might make a couple small tweaks.

Hopefully my feedback registered with you guys (650lb spring)

 

[bugkillr]

Got my Eibach order placed yesterday.
Looking forward to installing asap. After looking at YouTube videos of the "non- spring compressor method " of installation, I feel confident it'll be an easy install. Finding a competent alignment though......[emoji37]

 

[MGordo]

Yes, please do!

Based on a lot of your feedback we might make a couple small tweaks.

I would second a 2" lift for the front and possibly heavier spring, but not by a lot. My 1" Eibach lift coils arrived today.. not sure when I will get them installed.

 

[Ryan at Eibach]

I saw a bunch of kits get shipped today :clap2:

 

[Jessalec]

Finally getting around to posting a pic of mine... This past weekend near Roaring river state park in Missouri.

Sent from my Pixel 4 XL using Tapatalk

Tire size? It’s hard to tell! 265 or 275?

 

[DeltaWhiskey]

Got my Eibach order placed yesterday.
Looking forward to installing asap. After looking at YouTube videos of the "non- spring compressor method " of installation, I feel confident it'll be an easy install. Finding a competent alignment though......[emoji37]

Do you happen to have a link to the video?

 

[bugkillr]

Do you happen to have a link to the video?

YouTube

It's for a Taco, but the proccess looks almost identical.

 

[DeltaWhiskey]

YouTube

It's for a Taco, but the proccess looks almost identical.

Thanks, that was the only one I found

 

[MGordo]

My 1" Eibach lift coils arrived today.. not sure when I will get them installed.

Frig. UPS lost one set of the Eibach rear coils, so shop had to order another set. Hopefully they are in stock!

 

[Ryan at Eibach]

Frig. UPS lost one set of the Eibach rear coils, so shop had to order another set. Hopefully they are in stock!

Plenty in stock.

 

[papadop88]

Plenty in stock.

So I'm clear, the 1" lift rear coil also lifts the '19-'20 TRD Pros an inch right? It's not just for SR5s, ORPs, etc, right?

 

[Ryan at Eibach]

So I'm clear, the 1" lift rear coil also lifts the '19-'20 TRD Pros an inch right? It's not just for SR5s, ORPs, etc, right?

They are not any heavier in the rear, so they should work fine.