Front Grille- Whelen TIR3s, blue and amber LEDs, attached to front bumper with 3M Outdoor double-sided tape (no drilling, and holds very well!)
Hood Scoop- EP911 LP12 all blue LED in "Knight Rider" flash pattern.
Windshield- Whelen Slimlighter all blue LED.
Sides- Whelen TIR3s, both blue LEDs, attached to body, just in front of rock sliders, with 3M outdoor double sided tape. (Has lasted for several thousand miles, even several off roading trips).
Rear- Whelen 4 strobe, 90 watt pack- Par36 strobes, amber and blue, mounted to rear clothing hanger hook spots; two red hide a way strobes, one in each brake light.
View of back of truck- firefighter turnout gear bag on left, blue bag under shelf on right is EMS bag. Green bag, on left on top of shelf is O2 tank.
TouchTek VI control box, Whelen electronic airhorn/PA system and strobe pack under the left side of the shelf (behind turnout gear bag).
photo of one of the rear strobes, mounted where the clothing hook was. You can see how the wire is "tucked" into the plastic molding. It is brought forward down by the rear seat seat belts.
Center console with arm rest up to reveal scanner and place for future mobile radios. TouchTek VI LED control panel in view as well.
Slimlighter suction-cupped to winshield, with wire tucked into the A-post plastic molding, all the way down to the foot well.
Nice place for a portable radio.
Close-up of front bumper LEDs.
Close up of airhorn speaker (you can see the red end cap on the left lower part of the screen- I need to paint it black.)