Favorite Moly EP Lithium Grease?

[Cvett95]

I’ve just finished installing JBA UCA’s and am reaching out to hear your guys’ brand preference on this specific type of grease. The bushings in these arms are made from a “synthetic elastomer” and are recommended to be pumped with a Moly EP Lithium Grease

Any and all input will be greatly appreciated!

Charlie

 

[Spktyr]

"Synthetic Elastomer" = Polyurethane.

 

[Kanoe]

I'm fond of Valvoline Synpower with Moly. Synthetic for low temp and moly, although not a high percentage.

This is one grease that does not separate in the gun and make a mess.

 

[pluton]

I'm fond of Valvoline Synpower with Moly. Synthetic for low temp and moly, although not a high percentage.

This is one grease that does not separate in the gun and make a mess.

I've used this same grease across 4 vehicles for many years. Mine has shown separation at about the 5 or 6 year point. Since the typical automotive grease is approx. 75% oil, I don't worry if it loses 1% or 2%.