Fire Extinguisher Mounts/Mounting

Only if I never had any back seat passengers. Wouldn't want to get a face full of steel during a crash!


https://www.youtube.com/watch?v=ktsEv1abZWc

Have to get a little too close for my comfort. I'd go with a halotron extinguisher if I didn't want any residue.

https://elementfire.com/pages/comparison


Weighing the odds of having to deal with a fire you can't get fairly close to and carrying/mounting the weight of a massive gas bottle somewhere, all things considered? I see what you're saying for sure but ideally none of us will have to find-out the nuances of fighting our own fires if we're careful and mindful.

I seriously considered a CO2 bottle because of the mess ABC consumer units make if it has to be used on the vehicle. Again, weighing cost, maintenance, weight, potential results (or lack thereof) in the event of a fire, etc., etc...

Watched the Jay Leno video and I'm not sure as to just how close one has to be for these to be effective, they seem to throw a lot of results. In my opinion this is the new consumer extinguisher tech in it's infancy.

There's another company making pods that mount under your hood on the sheet metal with sensors that does the same thing "automatically".

https://www.youtube.com/watch?v=cC_0wKnT1cs

Yeah I know the dummy didn't open the hood... ;)

https://www.youtube.com/watch?v=WSToNBqSEok

A grease or spattering oil fire in the kitchen then sure, nuke it from orbit just to be sure with chemical and anything else by all means. If I can't get close enough to my vehicle for these Elements to be effective, realistically if there isn't a lot more help available and fast, it's all over but the screamin' anyway.

I've been driving all kinds of vehicles in all kinds of environments for over half a century and have never come close to having a fire. Perhaps all the more reason to be prepared for one but let's face it, there's not a lot of vehicles burning down if you use common sense and keep a vehicle in good condition.

It would have been interesting to see Coyote Works' Jeep fire while he was trying to put it out but I can only assume he used a consumer chemical ABC bottle that obviously didn't do a thing... The video is remarkable in many way though as a chronicle of a backcountry vehicle fire. The gent who owns the channel gets all my respect for how he did out there and the lessons he was able to share.

I've plans to mount mine with a homemade behind-the-seat mount (as I never have people in the back seats and don't intent to), will post a little thing if it works the way it should if anyone is interested.
 
Last edited:
Has anyone used this mounting solution?
01405e5cec7674365df62a65285229e1.jpg


https://ventureoverlandcompany.com/...north-bound-expeditions?variant=6910680531003
 
Check-out Coyote Works' catastrophe recently if you haven't seen it. This guy gets full props from me for his actions, conduct and sharing his experience and lessons.

However, it's one of the reasons I began looking for an extinguisher other than a consumer dry chemical bottle which apparently did nothing for this poor guy. I depend on Element now unless someone close has a halo or co2 bottle...

With the modern advent of "insurance", I'd almost rather my wagon burn to the ground rather than have it half-burnt and painted Alpine White Dry Chemical...

https://www.youtube.com/watch?v=afpnkCOsMFU
 
Fire Extinguisher Super Simple Mod. I’ve seen all kinds of mountings for Fire Extinguishers but this one couldn’t be simpler. Industrial strength velcro in 2 strips on the Fire extinguisher & placed on the carpet under the rear seat edge. It sticks there like a rock & is contained even if it didn’t, yet it’s easy to get to whenever you need it.
84d4c93227064f442220ab637cace896.jpg
61ea22045b42b7c5d92806e8d8311735.jpg
70969bd647edb610df3d066661c89160.jpg
6e8535cf9c71f0a660944811a7aae4d7.jpg
 
Quick fists and Rago molle rack...clean, secure, accessible in an emergency.
 

Attachments

  • 79C0361A-7D1A-46C2-936C-97E495A27B78.jpg
    79C0361A-7D1A-46C2-936C-97E495A27B78.jpg
    128.1 KB · Views: 3,231
I looked at that mount, but decided on quick fists instead. That mount adds more weight, and looks like it would rattle. The quick fists were also $10
 
I just used mount which came with extinguisher and fastened it to the trunk storage area (on the right):

34809228843_5951248a7d_o.jpg
 
Where is it? JK
Cold Steel entrenching tool is must have for any off roader

It's right by the shovel, small red cylinder on the right. I guess I should have taken better picture, this one was made last summer when I had to spend a weekend home and didn't have any camping stuff in my trunk.
 
ProTip: cut to length, slide on the clamp and melt? Heat? Shrink? some heat shrink for those hose clamps. Boom custom AF.

you cant go wrong with the rago, I bit the bullet and spent the $100 worth every penny in my book.
 

Attachments

  • rago.jpg
    rago.jpg
    135 KB · Views: 1,827
  • rago2.jpg
    rago2.jpg
    101.9 KB · Views: 1,578
  • rago1.jpg
    rago1.jpg
    126.1 KB · Views: 1,542
Last edited:

Members online

Forum statistics

Threads
278,310
Messages
3,554,079
Members
248,016
Latest member
Advally Service

Trending content

Back
Top