firewall access on driver side?

[maddevildog]

I'm looking for a grommet or hole to use to get a light bar wiring thru and don't see anywhere. Am i missing it or anyone have a tip on doing this? Its a 2002 4runner. Thanks

 

[reelamin]

I'm looking for a grommet or hole to use to get a light bar wiring thru and don't see anywhere. Am i missing it or anyone have a tip on doing this? Its a 2002 4runner. Thanks

Super easy to drill a hole and install a wire boot. I will take some pics later today and update this post. I deleted the internal pic too fast. If you want I can retake it. I got the boot from Summit Racing. I believe they call it a firewall boot. Has several diameter steps so it is air tight as you add more wires.

 

[02_SE_Runner_DAD]

You can squeeze it through the wires coming out above the steering column.

 

[infamousRNR]

I'm confused... why can't you use the existing factory firewall access hole that is already there?????....

I've squeezed 2 gauge wire through mine... remove steering column dash pieces to see it from the inside & if you open your hood, it should be fairly obvious where it is right under the brake master cylinder.... you should see a bunch of wires going through already

 

[MACT4R]

I went through the firewall grommet with no prob. Installed 2 light bar, 12v outlet, usb charger and 12v reader. You can put some silicon to seal it after.

Sent from my SM-G930P using Tapatalk