Firewall grommet plug

[arehman11]

Does anyone know the part number for the firewall grommet plug? I decided to remove my grill lights and want to replace the gromet as mine has a hole cut in it. This is the one that sits a bit higher up on the driver side and doesn’t have any wires running through it.

 

[kelkins]

Honestly, I would just.... A: silicone it, or B: leave it as is. I highly doubt it would hurt anything.

 

[jhguth]

can you even replace it without having to really mess with the stock wiring or do the wires have a connection nearby that's easy to undo?

 

[Cndnmax]

can you even replace it without having to really mess with the stock wiring or do the wires have a connection nearby that's easy to undo?

I’m thinking he’s talking about the smaller one that’s near by the main harness. I personally would not be messing with that harness.

 

[arehman11]

I’m thinking he’s talking about the smaller one that’s near by the main harness. I personally would not be messing with that harness.

That would be the one, It sits a bit higher up from the one where the main harness is. Probably about the size of a penny or nickle at most?

 

[90Duck]

That would be the one, It sits a bit higher up from the one where the main harness is. Probably about the size of a penny or nickle at most?

I ran my grill lights to a switch in the cabin through that hole. For some reason, I found a rubber grommet with a hole in it from a prior project that was just the right size in my miscellaneous box of stuff. I used that to replace the stock plug, which I don't need anymore. DM me if you want it and I can send it your way (I'll probably have to find it in my miscellaneous box of stuff, but it should be near the top since I just did it.)

 

[Raptor008v2]

90950-01955

Run that through Google images. Is that the one?

 

[arehman11]

90950-01955

Run that through Google images. Is that the one?

That looks like the one! Thanks so much! I spent two hours looking at parts diagrams and would never have thought to look for that.

 

[arehman11]

I ran my grill lights to a switch in the cabin through that hole. For some reason, I found a rubber grommet with a hole in it from a prior project that was just the right size in my miscellaneous box of stuff. I used that to replace the stock plug, which I don't need anymore. DM me if you want it and I can send it your way (I'll probably have to find it in my miscellaneous box of stuff, but it should be near the top since I just did it.)

Thanks! That would be awesome. I'll send you a message

 

[90Duck]

It’s this one. Just PM where you want it sent.