FJC springs + cornfed 1" front spacers + spidertrax installed

EDness

EDness

New member
i installed them by myself, followed the instructions posted in t4r and 120. The install went ok...hit a few problems here and there. If you have a friend to help with the install it'd be alot easier. All I have to say is that xreas is a pain in the butt.

I didn't measure it, but according to my search the springs should give me a 3/4" lift in the front and 1/2" in the rear. So with the spacers i got 1.75" in the front total.

I'll have to take a daytime photo...it's seems higher in person tho.

IMG_0471-vi.jpg

IMG_0473-vi.jpg

IMG_0475-vi.jpg

IMG_0476-vi.jpg

IMG_0478-vi.jpg

IMG_0486-vi.jpg

IMG_0487-vi.jpg

IMG_0485-vi.jpg

IMG_0489-vi.jpg
 
Last edited:
Register to hide this ad
Nice Ed. I've got a white '08 that I've been considering doing all three of those to. I've seen a lot of folks talk about the FJ stuff and say how easy it is to come by- where did you get yours?

Did the ride change at all?

I can't tell from the pics- did you do all three at the same time?

How long did it (all?) take you?

Plans to do anything different with the wheels/tires?

Again, looks good! Get those daytime pics up!
 
rpcowan said:
Nice Ed. I've got a white '08 that I've been considering doing all three of those to. I've seen a lot of folks talk about the FJ stuff and say how easy it is to come by- where did you get yours?

Did the ride change at all?

imo i think the ride got firmer, which is a good thing. The stock springs are too soft.

I can't tell from the pics- did you do all three at the same time?

yes...all at the same time. I need to take some pics but i might have to wait since i don't drive to work.

How long did it (all?) take you?

it took me awhile for the fronts since it was my first time. If i have to do it again it'll take me about 3 hours for the fronts. The rears took me 1.5 hours...very easy. Make sure you have an impact for the install. That saved me a crap load of time! I have a cheap impact from pepboys...works fine.

Plans to do anything different with the wheels/tires?

well i have BS revo 2 265/70/17 now...just got them a couple months ago.

Again, looks good! Get those daytime pics up!
Click to expand...

oh and i got mine from Toyota FJ Cruiser Community as well. These are actually off of a 2008 FJC Trail Team with 8000 miles on them, but all FJC springs are the same. Got the front and rear for $55 shipped.
 
Looks good! :bigok: I am amazed how many do this upgrade and are happy with it. You'd think Toyota would would have sprung it this way from day 1. I swear they drive smoother/better above 20mph or so. I love stopping without as much nosedive. The springs make it handle better and finally it just looks cooler:D


Congrats! Can't wait for some day pics. Be sure to stick a quick description and a pic here too:D http://www.toyota-4runner.org/4th-gen-t4rs/51742-lift-tire-central-pics-post-em-up-4.html
 
CJ3Flyr said:
Looks good! :bigok: I am amazed how many do this upgrade and are happy with it. You'd think Toyota would would have sprung it this way from day 1. I swear they drive smoother/better above 20mph or so. I love stopping without as much nosedive. The springs make it handle better and finally it just looks cooler:D


Congrats! Can't wait for some day pics. Be sure to stick a quick description and a pic here too:D http://www.toyota-4runner.org/4th-gen-t4rs/51742-lift-tire-central-pics-post-em-up-4.html
Click to expand...


yea it should be this way from the factory. Now i need to get the car aligned and aim the headlights lower.
 
EDness said:
yea it should be this way from the factory. Now i need to get the car aligned and aim the headlights lower.
Click to expand...
so your 4R is a 2006, what year springs did you get off of the FJC?
I have an 04 4R and would like to get some fj springs too
 
ARK_SWAMP_RIDER said:
Looks great! I've got the FJ springs for the front and a toytec spacer waiting for install. The best place for fj stuff is Toyota FJ Cruiser Community. I got mine for free, just had to pay shipping. Now, let's see the day pics!
Click to expand...

EDness said:
oh and i got mine from Toyota FJ Cruiser Community as well. These are actually off of a 2008 FJC Trail Team with 8000 miles on them, but all FJC springs are the same. Got the front and rear for $55 shipped.
Click to expand...

Thanks guys! FJ Forums isn't a site I'm familiar with but I'm definitely going to check it out- $55 shipped sounds like a steal.

ARK- Did you do yours yourself too?

Ed- I would definitely consider myself mechanically inclined and probably have all of the tools to do this, but how would you rate it 1 - 10 on difficulty/patience/time/etc?

Thanks for playing 20 questions! :biggrin2:
 
I've got my parts in, but haven't had time to do the install. I am however planning on doing it myself. There are a ton of writeups online that give great details, so although I'm not familiar with it I believe I can do it.
 
Sweet. I just got registered on FJ Forum and put up a WTB for front and rear springs.

Now don't anyone set me ablaze 'cause I used the search function and got about as far as anyone ever does with it. BUT, I'm looking for links to threads or web pages for install instructions doing exactly what Ed here did.

Bueller?
 
810moto said:
so your 4R is a 2006, what year springs did you get off of the FJC?
I have an 04 4R and would like to get some fj springs too
Click to expand...

i have an 06 and the springs were from a 2008 FJC with 8000 miles on them.

rpcowan said:
Thanks guys! FJ Forums isn't a site I'm familiar with but I'm definitely going to check it out- $55 shipped sounds like a steal.

ARK- Did you do yours yourself too?

Ed- I would definitely consider myself mechanically inclined and probably have all of the tools to do this, but how would you rate it 1 - 10 on difficulty/patience/time/etc?

Thanks for playing 20 questions! :biggrin2:
Click to expand...

I found that the instructions from toyota120.com were very clear. The rears i rated them a 3 and fronts a 7. Definitely try to do it yourself.
 
FJC Springs + Cornfed 1" & wheelspacers installed

I have added a link on your behalf here: http://www.toyota-4runner.org/general-discussions/21354-diy-mods-post-write-ups-here.html

Your thread and ARK SWAMP's awesome reply (the one with the great links) makes this a great thread IMHO.

These two threads are worth a read before you start. They are a tale of what can happen if you don't have great respect for how fragile the ABS sense wires can be. It also has some ball-joint tips too... http://www.toyota-4runner.org/4th-gen-t4rs/42630-lift-tires-will-weekend.html & http://www.toyota-4runner.org/4th-gen-t4rs/43200-zero-point-calib-not-working-please-help.html
 
Last edited:
I totally agree with Chris, this thread and it's included references has single handedly encouraged me to take on these projects with confidence.

Thanks for sharing your experience with the rest of us- exactly what makes this site the incredible resource it is.
 
Looks great! I like the 2nd daylight photo. Your ride looks sweet! I love my Salsa when it's clean and swirl free but you can't beat white. It photographs well even when it's dirty!
 
Forgot to mention, I had to trim the front bumper a little and move the fender liner forward. The wheels still rubbed a little bit in reverse at full lock, but not too bad. I followed the instructions from JA's site...very helpful.

Toyota 4Runner Wheel Spacers
 
You must log in or register to reply here.

Members online

No members online now.
Total: 551 (members: 1, guests: 550)

Forum statistics

Threads
278,316
Messages
3,554,112
Members
248,016
Latest member
Advally Service

Share this page

Trending content

Back
Top