Front end clunk(SOLVED!)

[TBuzz]

In my probing with a mallet I can here something is loose. After I jack it up under the lca and pull back and forth it's evident that the ubj is bad. Then tapping with a mallet repeats the offending noise that was getting more pronounced.

 

[Slow_T4R]

How long have you been running the spc ucas?

 

[cbielat]

I've had a clunking going on for quite a long time now. I've rebuilt my SPC's twice so far. I'm going to take a look now to see if this is my current problem. I know my bushings are super loud but couldn't narrow down the clunking. Thanks for posting this. It'll let me narrow it down. I had a feeling it could be this.