FS: 4th/5th gen RED TRD PRO SPRINGS 14" X600LB AND CAMBURG UCA WITH MOOG BJ, Houston

[RedRumt4r]

FS: 4th/5th gen RED TRD PRO SPRINGS 14" X600LB AND CAMBURG UCA WITH MOOG BJ, Houston

I



Everything has sold guys thanks for the interest!






guess my post been deleted bc I didnt follow the rules, my mistake.

Anyways, just like the title states I have some camburg uca with moog joints for sale. I bought them off another member 1.5 year ago. He stated they were low miles but I dont remember how many. But I put roughly 15k on them and worked fantastic with my 3" lift. Everything seems to be in good condition for the next person to use. No tears or leaks from the bushings or boots. Previous owner put rotiform center caps on top of the bj to act as a Dust cover. I want 400 for these shipped or picked up locally.

And I have some trd pro front springs 14x600lbs. I changed them out for heavier springs. They look a little dirty but almost new with less them 1k miles on them ans I want 150 shipped or picked up locally.

If I have to ship only lower 48 states I'll do and please be PayPal verified. All local people get 1st priority.

Thanks for looking.

 

[PCF4runner]

Do i get any lift with these coils? If i understand correct these will fit a 4th gen right? And lastly 600lbs is for stock front weight correct?

I guess my post been deleted bc I didnt follow the rules, my mistake.

Anyways, just like the title states I have some camburg uca with moog joints for sale. I bought them off another member 1.5 year ago. He stated they were low miles but I dont remember how many. But I put roughly 15k on them and worked fantastic with my 3" lift. Everything seems to be in good condition for the next person to use. No tears or leaks from the bushings or boots. Previous owner put rotiform center caps on top of the bj to act as a Dust cover. I want 400 for these shipped or picked up locally.

And I have some trd pro front springs 14x600lbs. I changed them out for heavier springs. They look a little dirty but almost new with less them 1k miles on them ans I want 150 shipped or picked up locally.

If I have to ship only lower 48 states I'll do and please be PayPal verified. All local people get 1st priority.

Thanks for looking.

 

[RedRumt4r]

Do i get any lift with these coils? If i understand correct these will fit a 4th gen right? And lastly 600lbs is for stock front weight correct?

I think they should yield a 1" lift and 600lb for stock weight I'm sure. But I think if you added weight it would drop the front down at all. Because when I had my bumper installed it didnt move the front end down at all

 

[htrddah]

Have the front springs sold yet

 

[RedRumt4r]

Have the front springs sold yet

Na still sitting in the back of my truck

 

[htrddah]

Na still sitting in the back of my truck

I’ve tried to look up part number and still trying but do you know if these are the front springs on 4 runner pro?

 

[Bayou_Pro]

And I have some trd pro front springs 14x600lbs. I changed them out for heavier springs. They look a little dirty but almost new with less them 1k miles on them ans I want 150 shipped or picked up locally.

I do not believe these are 4Runner TRD Pro springs, at least not 5th Gen 4Runner. The factory Pro springs are 13" and 520# I think. They are the specs you listed and look like a set of TRD FJ Ultimate Trail springs. With those specs they should get about 2 inches of lift on a stock 4Runner.

Not trying to hijack here just wanted to make you aware. I was looks for some 14" 600# springs last week, wish I would have seen this. Good luck.

 

[Bayou_Pro]

I’ve tried to look up part number and still trying but do you know if these are the front springs on 4 runner pro?

See my above post. That should clear it up.

PTR1335140AA - Spring. Suspension Kit. Ultimate, Front, Cruiser, Chassis - Genuine Toyota Accessory

 

[htrddah]

See my above post. That should clear it up.

PTR1335140AA - Spring. Suspension Kit. Ultimate, Front, Cruiser, Chassis - Genuine Toyota Accessory

Thank you I didn't think the 5th gen were 600# thanks again

 

[RedRumt4r]

Thank you I didn't think the 5th gen were 600# thanks again

At 1st I thought they were 4runner trd pro springs but more research t4r are 3x13x550lb and fj trd pro is 3x14x600lb

 

[DeserT4R]

At 1st I thought they were 4runner trd pro springs but more research t4r are 3x13x550lb and fj trd pro is 13x14x600lb

Are the coils still available? Are they 3x14”? Want to make sure they would fit the 2.5” struts on the pro.


Sent from my iPhone using Tapatalk

 

[RedRumt4r]

Are the coils still available? Are they 3x14”? Want to make sure they would fit the 2.5” struts on the pro.


Sent from my iPhone using Tapatalk

Yes they are still available. And these are directly off trd pro suspension

 

[DeserT4R]

Yes they are still available. And these are directly off trd pro suspension

To clarify, the coils you are selling are off of the FJ Pro suspension or off of the 4Runner pro suspension?


Sent from my iPhone using Tapatalk

 

[Akkording]

It appears to be the FJ Pro suspension part number
3"x 14" 600# spec

 

[Neoda0n3]

Do you still have the UCAs

 

[4runner425]

PM'd you last week, but not sure it went through. I'm interested in the springs, will PM you again.

 

[Ratubbs]

Still have the fronts ?????


Sent from my iPhone using Tapatalk

 

[RedRumt4r]

Sorry guys everything has been sold! Thanks everyone for your interested l. Mods please lock

 

[RedRumt4r]

Everything has been sold already! Thanks everyone