• If you plan to post to Classified forums, you must follow these rules, or your post will be deleted.

    1. Thread title must include at a minimum: FS or FT, Item(1st, 2nd, 3rd, 4th or 5th gen), Price and Location. For Example: FS: 4th GEN Carpet Floor Mats - Tan, $50 Denver, CO.
    2. All Threads must contain the following information
      • What is for sale/trade (model, specs, etc.)
      • Condition
      • Price/What you want to trade for
      • Location of item
      • At least one picture of the item for sale or for trade
    3. No "Feeler" Threads - Its either for sale or it isn't.
    4. Moderators lock Classified Threads that have not had any activity in 90 days or when the part is announced SOLD.
    5. Threads not complying with the rules will be deleted without notice.

FS: Icon 2 inch Rear Lift Springs - Denver - $175

Spudgey

New member
Hi there!

Selling my Icon 2 inch lift springs.

Have had these on my truck for about 8000 miles.

Only reason I'm selling is because I wanted something in the 3 inch range.

These rode really well. Slightly stiffer than stock. Cleaned up the ride nicely.

Anyway, I would consider these to be 8/10 as far as condition. Have some wear at the bottom where they seat against the axle. Pretty normal stuff for a spring.

Looking to get $175 for them.

Located in Denver.

Local pickup for now as I really don't want to ship these.

May open up to shipping if I don't get any hits in a week or so.

Will add pics later.

Product link: 2003 - Current 4Runner 2" Lift Rear Coil Springs - ICON Vehicle Dynamics

2003-current-4runner-2-lift-rear-coil-springs.jpg
 
Register to hide this ad
Also interested if shipping is an option. I'm in NY (13904).

Hi there,

Sorry but I didn't see your post till today.

These are still available.

Shipping to NY will be around 60. I'd be willing to split the shipping cost with you and do $200 all in.

Let me know.
 
What’s your best price you could ship to 98031 WA? Got a quote for new set at $238, thanks!

I'll run over to the post office tomorrow morning and see what the shipping cost to your zipcode is.

I can let you know then.

Thanks!
 
What’s your best price you could ship to 98031 WA? Got a quote for new set at $238, thanks!

6 day shipping will run 48 bucks and 2 day is 55.

I can let these go to you for 200 all in. I'll cover part of the shipping costs.

Let me know!
 
I really appreciate you checking on the shipping quote! I have found 2 dealers who can ship them new for $238 so for $38 ill probably just go new, but if you ver come down closer to $150 shipped let me know! Thanks

6 day shipping will run 48 bucks and 2 day is 55.

I can let these go to you for 200 all in. I'll cover part of the shipping costs.

Let me know!
 
I really appreciate you checking on the shipping quote! I have found 2 dealers who can ship them new for $238 so for $38 ill probably just go new, but if you ver come down closer to $150 shipped let me know! Thanks

I totally understand. I'm not willing to let them go for that cheap. With shipping I'd only be getting 100 dollars back for them.

Anyway, best of luck with your build! You're really gonna love these springs. They ride great.
 
I’m local and am considering new springs. Where did you have them installed/removed? Trying to factor that into the overall cost etc.
 
I’m local and am considering new springs. Where did you have them installed/removed? Trying to factor that into the overall cost etc.
I actually did the full suspension install myself.

The rear is by far the easier installation.

I had never done a suspension install before and both springs and shocks were replaced in about 2hrs. Someone that knew what they were doing could probably accomplish it in an hour.

With that said, I've had RSG Offroad do my alignments for me and I'd highly recommend them for anything 4runner related.
 
Thanks! I've got 5100's on the front with stock coils. Just debating on pulling the trigger on the rear. I may call around for quotes to install on the rear. Thanks again.
 
Thanks! I've got 5100's on the front with stock coils. Just debating on pulling the trigger on the rear. I may call around for quotes to install on the rear. Thanks again.

Alrighty, sounds good.

If you do decide you want to do it yourself you could borrow my jack stands and floor jack.

Aside from that, a torque wrench, and some assorted sockets, that's all you need for the job.
 
Thanks, very much appreciated. Had a 2011 DC Tacoma before lifted the way I wanted but just had twins and two rear facing carseats wouldn't fit so well. Ended up trading for a 2018 4runner and slowly getting it where it needs to be... Perfectly level at the moment, but 3rd row seating adds quite a bit of weight. Hence my interest.

Thanks again. I'll let you know if I decide to pull the trigger.
 

Members online

Forum statistics

Threads
278,317
Messages
3,554,129
Members
248,016
Latest member
Advally Service

Trending content

Back
Top