FT: 4th GEN FN_Wheels w/ Nitto Grapplers - Swap + $$

[4R_Sport_03]

Swap your old stock tires/wheels for these:
(x4) FN Wheels Pro, Dark High Gloss Gunmetal.
with (4) Nitto Grappler G2, with just under 20k on them.
FN Wheels are spotless, like new.

As a northern car transplant to GA, no one here will operate on rusty 03 Sport 4WD with cracked exhaust manifold. Going to have to donate or sell to VROOM after all this. So my loss your gain if you're ready for new tires anyway, make cash offer plus get rid of your old set.

Also have an Alpine Deck with GPS, if interested.

Location: Decatur, GA
(near Lawrencville Hwy and 285)

Thanks,

 

[Chronus]

PM'd

 

[montijo505]

Swap your old stock tires/wheels for these:
(x4) FN Wheels Pro, Dark High Gloss Gunmetal.
with (4) Nitto Grappler G2, with just under 20k on them.
FN Wheels are spotless, like new.

As a northern car transplant to GA, no one here will operate on rusty 03 Sport 4WD with cracked exhaust manifold. Going to have to donate or sell to VROOM after all this. So my loss your gain if you're ready for new tires anyway, make cash offer plus get rid of your old set.

Also have an Alpine Deck with GPS, if interested.

Location: Decatur, GA
(near Lawrencville Hwy and 285)

Thanks,

How many shops have you checked? Is the rust that bad?


Sent from my iPhone using Tapatalk

 

[4R_Sport_03]

How many shops have you checked? Is the rust that bad?


Sent from my iPhone using Tapatalk

I never had the impression it was that bad when I lived up north, but down in Georgia no one seems to want the liability of this job due to the corrosion.
But they aren't used to working with much rust down here supposedly.

 

[montijo505]

I never had the impression it was that bad when I lived up north, but down in Georgia no one seems to want the liability of this job due to the corrosion.
But they aren't used to working with much rust down here supposedly.

I’d check around a bit more if the frame is sturdy and you want to keep it. Of course if you’re just done with it do what you will.

What kind of deck you have? Lol


Sent from my iPhone using Tapatalk

 

[bxc13]

Hi,

Can you provide the width, offset and tire size?

thanks!
bill

 

[G-C@T]

Private message sent.

 

[toyo]

I have a shop in Cumming and would be more than happy to help you out. Usually the shops around here are just too lazy to deal with repairs that are not cut and dry.
My name is Steve and I can be reached at 770-231-9053. I currently have several very satisfied customers who are members here.

 

[S2kfm]

Are these still for sale?