H20skier70
New member
I got everything that I wanted to do, done yesterday. The lift is complete! :rockon: I ended up turning the ball joints around but I still had to adjust the toe in. Which putting some heat on that sucker did the trick. I put a set of my buddies wheels on so I can strip and paint my stock ones before I get the new tires mounted. I really like the look of the black and gold, looks like I'm going to have to start attacking all the chrome emblems on the truck!
After everything was all said and done I took the truck out of the garage for a couple pics and then drove it right back in to finish a couple small things. Now the truck just clicks when I go to start it. :redbrick: I hooked my jumper cables up to the truck and my Camry, that just melted the cables and damn near started a fire. Kind of pissed and tired of throwing money at this thing and not getting to reap any of the benefits. I have a feeling the starter pooped out; but I really hope it isn't, considering the location and ultimate pain in the ass that it is to change.
I am planning to swap the battery from the Camry in to the 4Runner, just to rule that out. If that doesn't work, then my Father in Law is going to bring over some device that they use to check if the starter is bad or something from their repair shop. It might just be an volt meter but I don't know. If the starter is fine then I have no freaking clue what else it could be, since I swapped the relays around last night.
EDIT: Ended up being the battery! Thank goodness!
<a href="http://s1291.photobucket.com/user/H20skier70/media/DF4CGWW1/My%204Runner/20140405_201723_zpsusd6azxb.jpg.html" target="_blank"><img src="http://i1291.photobucket.com/albums/b541/H20skier70/DF4CGWW1/My%204Runner/20140405_201723_zpsusd6azxb.jpg" border="0" alt=" photo 20140405_201723_zpsusd6azxb.jpg"/></a>
<a href="http://s1291.photobucket.com/user/H20skier70/media/DF4CGWW1/My%204Runner/20140405_201730_zps6ykazmbv.jpg.html" target="_blank"><img src="http://i1291.photobucket.com/albums/b541/H20skier70/DF4CGWW1/My%204Runner/20140405_201730_zps6ykazmbv.jpg" border="0" alt=" photo 20140405_201730_zps6ykazmbv.jpg"/></a>
After everything was all said and done I took the truck out of the garage for a couple pics and then drove it right back in to finish a couple small things. Now the truck just clicks when I go to start it. :redbrick: I hooked my jumper cables up to the truck and my Camry, that just melted the cables and damn near started a fire. Kind of pissed and tired of throwing money at this thing and not getting to reap any of the benefits. I have a feeling the starter pooped out; but I really hope it isn't, considering the location and ultimate pain in the ass that it is to change.
I am planning to swap the battery from the Camry in to the 4Runner, just to rule that out. If that doesn't work, then my Father in Law is going to bring over some device that they use to check if the starter is bad or something from their repair shop. It might just be an volt meter but I don't know. If the starter is fine then I have no freaking clue what else it could be, since I swapped the relays around last night.
EDIT: Ended up being the battery! Thank goodness!
<a href="http://s1291.photobucket.com/user/H20skier70/media/DF4CGWW1/My%204Runner/20140405_201723_zpsusd6azxb.jpg.html" target="_blank"><img src="http://i1291.photobucket.com/albums/b541/H20skier70/DF4CGWW1/My%204Runner/20140405_201723_zpsusd6azxb.jpg" border="0" alt=" photo 20140405_201723_zpsusd6azxb.jpg"/></a>
<a href="http://s1291.photobucket.com/user/H20skier70/media/DF4CGWW1/My%204Runner/20140405_201730_zps6ykazmbv.jpg.html" target="_blank"><img src="http://i1291.photobucket.com/albums/b541/H20skier70/DF4CGWW1/My%204Runner/20140405_201730_zps6ykazmbv.jpg" border="0" alt=" photo 20140405_201730_zps6ykazmbv.jpg"/></a>
Last edited:

















