Has anybody ADDED a rear sliding cargo tray?

I just ordered a 2021 TRD Pro without one and it's on it's way to the dealership. I was unable to add the rear sliding cargo tray. This seems to be very useful for my kids and I am now trying to figure out how to add it.

Anyone have luck with getting a dealership to install this?
 
I just ordered a 2021 TRD Pro without one and it's on it's way to the dealership. I was unable to add the rear sliding cargo tray. This seems to be very useful for my kids and I am now trying to figure out how to add it.

Anyone have luck with getting a dealership to install this?

I'm considering removing my tray (2011 4Runner Trail). I'm in Boise - not exactly close but not all that far either. I have the rubberized cargo mat on ours since new so the slide looks practically brand new.
 
I've decided to remove my tray for installation of a BOSS Strongbox 4Runner drawer system.

Rather than find someone to swap parts with, I decided to just buy the required parts so that I can swap back to the factory slide if I ever sell my 4Runner - especially if I upgrade to a new 4Runner and want to move the box over to the new rig.

If anyone is looking to do the same here are the Toyota OEM parts (with MSRP prices) that you need to convert the cargo area to a non-slide model:

(2) 58249-60020; BRACKET, CENTER FLOOR BOARD SUPPORT $20.37 ea.
* You can reuse the two bolts per bracket from the brackets you are swapping. They are the same part numbers.
(2) 64721-60010-C0; COVER, LUGGAGE COMPARTMENT $37.21 ea. (these are the cargo D rings and are a different shape than the ones on the cubby/panel you are removing)
(1) 58401-35061-C3; BOARD SUB-ASSY, RR FRONT $232.24 (this replaces the storage cubby with the sloped floor behind the rear seat)
(1) 58579-35021; PAD, RR FLOOR $248.22
(1) 58570-35150-C5; CARPET ASSY, RR FLOOR $482.42

Notes:
1) I found all of the parts online from another Toyota dealer for much less than MSRP (even with the $100 S&H). My local dealer wanted full MSRP + sales tax. :gun6:

2) The carpet alone nearly doubles the cost and for some reason, Toyota considers it freight so it adds ANOTHER $200+ in shipping. (You can't just roll it up and shove it in a box? :shrug: ) Since I am covering all of the rear carpet with a Strongbox, I found a roll of automotive carpet on Amazon for $37.48 & free shipping. Reviews were good and one person mentioned using it in their 4Runner for a sleeping platform and it was a near-perfect match to the factory carpet. I will cut to size with enough to tuck under the trim pieces.
 
Last edited:
Cargo Tray in Philly

Anyone interested in parting with a sliding cargo tray near the Philly area? Would like to add one to my 2016. Please PM me if you may be interested in replacing.
 
Rear cargo deck (in Canada)

I’ve always wanted the rear sliding cargo tray ever since the original Trail came out in 2010. From Vancouver, BC I scoured the Craigslist ads in Canada and the US for years but to no avail. Last year I bought a used (new to me) 2018 magnetic grey 4runner ORP and I found a used Trail roof rack in New Jersey that my brother in law shipped out to me.

When I bought the truck, the local dealership gave me twenty five percent off on any new, future parts. When I went to the parts counter, I had to explain to the technician what the rear sliding cargo deck was …….I guess in Canada they’re rare, and seldom seen; although, they’re currently installed in the latest Trail model. $3000 CAN later, I have all the parts, but waiting for hardware. Yes, we pay twice as much for parts in Canada….:crazy:

Anyways, I seldom message on here, but I wanted to thank all the folks for their input in the thread….all the info, and pics were a tremendous help in getting this sorted! :bravo::bravo::bravo:

Cheers and be well!
 
removing my slider

Just got a 22 4runner in Dec. Tray is a big waste of space for me and serves no purpose so I'm removing it. Rather, my mechanic is taking it out.

What's a good price to sell it for and is it a pain to put it back to a stock config?

I was just thinking to spray some LineX in there and get a weathertech mat and be done with it.
 
Last edited:
does this work for my 2022?

I've decided to remove my tray for installation of a BOSS Strongbox 4Runner drawer system.

Rather than find someone to swap parts with, I decided to just buy the required parts so that I can swap back to the factory slide if I ever sell my 4Runner - especially if I upgrade to a new 4Runner and want to move the box over to the new rig.

If anyone is looking to do the same here are the Toyota OEM parts (with MSRP prices) that you need to convert the cargo area to a non-slide model:

(2) 58249-60020; BRACKET, CENTER FLOOR BOARD SUPPORT $20.37 ea.
* You can reuse the two bolts per bracket from the brackets you are swapping. They are the same part numbers.
(2) 64721-60010-C0; COVER, LUGGAGE COMPARTMENT $37.21 ea. (these are the cargo D rings and are a different shape than the ones on the cubby/panel you are removing)
(1) 58401-35061-C3; BOARD SUB-ASSY, RR FRONT $232.24 (this replaces the storage cubby with the sloped floor behind the rear seat)
(1) 58579-35021; PAD, RR FLOOR $248.22
(1) 58570-35150-C5; CARPET ASSY, RR FLOOR $482.42

Notes:
1) I found all of the parts online from another Toyota dealer for much less than MSRP (even with the $100 S&H). My local dealer wanted full MSRP + sales tax. :gun6:

2) The carpet alone nearly doubles the cost and for some reason, Toyota considers it freight so it adds ANOTHER $200+ in shipping. (You can't just roll it up and shove it in a box? :shrug: ) Since I am covering all of the rear carpet with a Strongbox, I found a roll of automotive carpet on Amazon for $37.48 & free shipping. Reviews were good and one person mentioned using it in their 4Runner for a sleeping platform and it was a near-perfect match to the factory carpet. I will cut to size with enough to tuck under the trim pieces.

thanks for the list but when I search the websites of the toyota dealers selling the items it says it's only for the 2020 and not 2022.
 
I've decided to remove my tray for installation of a BOSS Strongbox 4Runner drawer system.

Rather than find someone to swap parts with, I decided to just buy the required parts so that I can swap back to the factory slide if I ever sell my 4Runner - especially if I upgrade to a new 4Runner and want to move the box over to the new rig.

If anyone is looking to do the same here are the Toyota OEM parts (with MSRP prices) that you need to convert the cargo area to a non-slide model:

(2) 58249-60020; BRACKET, CENTER FLOOR BOARD SUPPORT $20.37 ea.
* You can reuse the two bolts per bracket from the brackets you are swapping. They are the same part numbers.
(2) 64721-60010-C0; COVER, LUGGAGE COMPARTMENT $37.21 ea. (these are the cargo D rings and are a different shape than the ones on the cubby/panel you are removing)
(1) 58401-35061-C3; BOARD SUB-ASSY, RR FRONT $232.24 (this replaces the storage cubby with the sloped floor behind the rear seat)
(1) 58579-35021; PAD, RR FLOOR $248.22
(1) 58570-35150-C5; CARPET ASSY, RR FLOOR $482.42

Notes:
1) I found all of the parts online from another Toyota dealer for much less than MSRP (even with the $100 S&H). My local dealer wanted full MSRP + sales tax. :gun6:

2) The carpet alone nearly doubles the cost and for some reason, Toyota considers it freight so it adds ANOTHER $200+ in shipping. (You can't just roll it up and shove it in a box? :shrug: ) Since I am covering all of the rear carpet with a Strongbox, I found a roll of automotive carpet on Amazon for $37.48 & free shipping. Reviews were good and one person mentioned using it in their 4Runner for a sleeping platform and it was a near-perfect match to the factory carpet. I will cut to size with enough to tuck under the trim pieces.

Only problem I ran into on this list is 58570-35150-C5 DOES NOT FIT a 2022. For 2022 it's 58570-35160-C1.

Mechanic just pulled it out for me - now how/where do I sell it?! It's up on FB Marketplace for $1k. Costing $600+ for the standard parts to replace it.
 
Last edited:
Only problem I ran into on this list is 58570-35150-C5 DOES NOT FIT a 2022. For 2022 it's 58570-35160-C1.

Mechanic just pulled it out for me - now how/where do I sell it?! It's up on FB Marketplace for $1k. Costing $600+ for the standard parts to replace it.

This is incorrect, I ordered a 58570-35160-C1 for a 2022 4runner and it is the carpet for the rear slider the part number for the no slider and no third row carpet is 58570-35180-C0.


I have a complete slider from new 2022 4runner with everything for sale if someone wants it. dm me .
 
Seeking: Genuine rear sliding cargo deck tray

Hello everyone,

Inquiring to see if anyone has or is looking to sell their genuine rear sliding cargo deck tray with all required parts for install. Looking to put this into a newer 2023 4runner TRD Pro, and replace the standard flat carpeted area.

Thank you! :)
 

Members online

Forum statistics

Threads
278,316
Messages
3,554,120
Members
248,016
Latest member
Advally Service

Trending content

Back
Top