Hawaiiski's 1998 build

Hawaiiski

New member
Hey what's up everyone, my name's Joe and I figured I'd move all the pictures I've posted from my intro thread to a new build thread. I guess I'll say a little bit about myself, I'm 23, born in Hawaii and I live in Virginia now. My current DD is a 2006 350z but I've slowly been switching over to the runner. I've always wanted a runner and was very close to trading my Z in for a runner but decided to keep the Z and got a runner anyways. Enough with the talking and on to the beginning of the runner build/pictures.

Specs:
1998 Toyota 4runner limited
miles-262,xxx
Engine: V6
Trans: Auto
options:
-Rear diff locker
-Yakima ski/snowboard rack

Upgrades/Mods so far:
-Plasti-dipped rear and side emblems
-Rain guards
-Added rear spoiler/deflector
-Partial L.E.D. gauge and dash upgrade
-Changed the color of the clock
-Tinted turn signals and corner lights
-99 center console/cup holder mod
-99 Seats

Upgrades/Mods to come:
-Tundra brake upgrade 13we (already purchased)
-KYE/Koyo radiator
-B&M trans cooler
-Toytec lift
-Pro comp/Volk wheels
-Exhaust
-Fresh paint
-Rear tow hitch
-L.E.D. tails
-99-02 headlights and turn signals
-Retro fitted headlights
-Ultra gauge
-Gauge pod with trans temp/ oil pressure
-Roof Rack
-Some sort of steel bumpers for the front and rear
-Winch
-ARB awning
-Sleeping platform
-Snokel
-99-02 sport hood (already purchased, just needs paint)

I'm sure there's more I just can't think of them.



Day I got her in early November
2012-11-0295164955.jpg~original

2012-11-0295164948.jpg~original

2012-11-0295165010.jpg~original

2012-11-0795120524.jpg~original

2012-11-0795120533.jpg~original

2012-11-0795120601.jpg~original

download1.jpg~original

download2.jpg~original

download.jpg~original


Steering wheel was tore up so I got this DU steering wheel cover, I love duck hunting!
2012-11-07221729.jpg~original


My runner was missing the cargo cover so I scooped this one up from the local salvage yard.
2012-11-07222108.jpg~original


Got these rain guards from amazon
2012-11-07222000.jpg~original

Installed
2012-11-09113342.jpg~original


Got the rear spoiler/air deflector from the same salvage yard
2012-11-07222027.jpg~original


Painted and installed
IMG_0424.jpg~original

IMG_0425.jpg~original


Trd decals
IMG_0423.jpg~original

Before:
IMG_0426.jpg~original

After:
IMG_0427.jpg~original
 
Last edited:
Register to hide this ad
Continued

I tinted the front corner lights and turn signals with VHT night shades
Before:
IMG_0435.jpg~original

After:
IMG_0472.jpg~original


My center console lid was broken so I ghetto rigged it with some latches from home depot:
IMG_0477.jpg~original


Ordered some L.E.D.s from superbright:
IMG_0474.jpg~original

Key ring light done in blue:
IMG_0514.jpg~original


You probably already know what the green lights look like, here's what they look like after the 360 L.E.D. gauge light swap
IMG_0520.jpg~original

IMG_0521.jpg~original


Got these Apollo gel swatches to change the color of my clock from green to white. Thanks for the idea GottabeTRD
IMG_0438.jpg~original

Before:
IMG_0592.jpg~original

After:
IMG_0593.jpg~original


Went back to the same salvage yard I got the seats, rear deflector and cargo cover and got a few more things.

2002 Tundra brake calipers 13we(199mm)
IMG_0613.jpg~original

IMG_0614.jpg~original

IMG_0615.jpg~original

I probably won't do that swap until the brakes on my runner go bad, become warped or when I step it up to 33's, which ever comes first.

1999 Center console/cup holder(got this for $30 bucks!) I've been searching that yard high and low for a 99 console with the rear heater; finally got one.
IMG_0616.jpg~original

IMG_0617.jpg~original

IMG_0624.jpg~original

99 vs 98 consoles
IMG_0627.jpg~original

IMG_0628.jpg~original

IMG_0629.jpg~original

IMG_0630.jpg~original
 
Continued

IMG_0631.jpg~original

IMG_0633.jpg~original


I used a pizza box to make an outline/cutout diagram
IMG_0632.jpg~original


98 Center console removed
IMG_0635.jpg~original


Goodies I found under my old console haha, looks like someone liked to party.
IMG_0626.jpg~original


Test fitting the 99 console
IMG_0637.jpg~original


Relocated the ECT PWR switch and rear window switch
IMG_0640.jpg~original


Finally done and bolted down
IMG_0643.jpg~original


Seat back in
IMG_0644.jpg~original

IMG_0647.jpg~original


Ordering the Ultra Gauge this weekend and might go back to that salvage yard just to look around and see if I see anything I want. They have like 20 3rd gen t4r!
 
Nice build man! Moving fast. Keep it up and get that thing out on the trails!

You said there were a lot of 30 gens by you? Anyway you could grab me a 96-98 grille for me to satoshi?? I would be super grateful and would definitely throw you a couple bucks for helping me out. Send me a PM if ya think we could work something out.
 
Nice so far! That's one amazing collection of "stuff" that you found under your center console.
 
Nice so far! That's one amazing collection of "stuff" that you found under your center console.
Thanks man, haha but yeah it was quite a find, I got a good laugh out of it. I might go back to that yard this weekend and pull some tundra trd coils, same truck I got the brakes from.
 
Nice build man! Moving fast. Keep it up and get that thing out on the trails!

You said there were a lot of 30 gens by you? Anyway you could grab me a 96-98 grille for me to satoshi?? I would be super grateful and would definitely throw you a couple bucks for helping me out. Send me a PM if ya think we could work something out.

PM replied
 
Nice thread man! And also thanks for the led. Plan on putting it in today. Man I really want one of those consoles!
 
Nice thread! I like the center console swap! How hard was/is it? How much of a pain to relocate the switches to the dash? I was wondering what you were going to do with them........
.
And thanks for the light also!!
Oh yeah, did you get 5 pieces of rain guards? 1 for the sunroof.
 
Last edited:
Nice thread man! And also thanks for the led. Plan on putting it in today. Man I really want one of those consoles!

No problem and thanks man, I might be able to snag you one next time I go although I don't have a paypal, might have to use my dads.

Nice thread! I like the center console swap! How hard was/is it? How much of a pain to relocate the switches to the dash? I was wondering what you were going to do with them........
.
And thanks for the light also!!
Oh yeah, did you get 5 pieces of rain guards? 1 for the sunroof.

Thanks! It wasn't that hard, I was more worried about cutting too much because I didn't feel like going to get a new one, only took me about 2 hours with the wrong tools(right tools probably an hour). As for relocating the switches, all I had to do was unravel the looms and separate the switches from the e brake sensor. The rain guards came with only 4 pieces, my runner already had the sunroof guard, it says toyota on it so I imagine you might be able to get it from the dealership. Hope the L.E.D. works out for you!

what salvage yard are you going too? im from the chesterfield area

I believe it's called "pick a part" the one I go to is in Fredricksburg but they have two locations with another one in Sandston I think.
 
New updates and parts

Well just a few updates, I recently went back to that infamous yard I always speak of and took my buddy who just got a 4runner(got him to register on t4r!).
The previous time I went, I saw a trd tundra that looked to have decent shocks and coils, so when I went this week I had my mind set on buying those and trying to locate some rear LC coils. Well needless to say I found something else I wanted, so I had to narrow it down, it was either the trd struts or a OEM perfect condition evergreen sport hood with all hardware. I literally debated with myself and my buddy on what to get, I talked myself into getting the struts but being hesitant like I am I went and double checked them. After closer inspection the little rubber "things" on the bottom shock looked to be cracking and they only offered a 14 day warranty and I knew I wasn't going to install them until I got my rear springs too. So I changed my mind and got the sport hood because they only had one and it just came in so I scooped it up!
IMG_0675.jpg~original


I also went ahead and removed my running boards, didn't really get any good before and after shots.
Tools used:
1)PB Blaster (very helpful but not needed)
2)Closed end 13mm wrench
3)13mm deep socket with rachet
4) Gloves
5) Safety glasses (recommended) I started off with no glasses but after something got in my eye I went ahead and put them on.
6) Tarp

Before:
IMG_0677.jpg~original


After:

IMG_0678.jpg~original

IMG_0676.jpg~original

I think it looks a million times better and it only took about 30 mins, gives the illusion of a lift now.

Since I was under my runner I went and checked out some things.
Looks like I'll be needing a new muffler soon.
IMG_0683.jpg~original

I also checked out the LBJs and they looked decent, a little bit of cracking in the rubber so I'll probably replace those when I do the brakes.
IMG_0679.jpg~original

Does this look normal? This is right under the oil pan area, I'll put a piece of cardboard under the engine tonight to see if anything is leaking.

IMG_0680.jpg~original

IMG_0681.jpg~original
 
Dude...I had no clue they had that many T4R's nearby in the junkyards. If you're going to be in/out of one of 'em between now and when I pop down there, can you see if any of them have the 'sport' gray interior? I've got the Highlander version with the cloth seats/coverings, and broke the plastic clip thingy off of the driver's side door panel. *facepalm*
 
Dude...I had no clue they had that many T4R's nearby in the junkyards. If you're going to be in/out of one of 'em between now and when I pop down there, can you see if any of them have the 'sport' gray interior? I've got the Highlander version with the cloth seats/coverings, and broke the plastic clip thingy off of the driver's side door panel. *facepalm*

Yeah definitely, if I can remember correctly the one I got the hood from might have been a 1999 highlander, so I'll def check it out for you. When are you moving up this way? It seems recently that I go at least once a week, 45 min drive each way is a bit of a pain but for how many t4r's they have it's totally worth it. The guy who works there says they get on average 50 cars a day! When you move out this way I'd have no problem taking you there, I don't know if you'd mind hanging out with a 23yr old for a couple hours haha.
 
Dude - we're not moving that way LOL! Way too expensive for me. My in-laws live there; we'll be there for Christmas break. :)

That being said, 45 minutes one way for some CHEAP (hopefully?) 4Runner parts would TOTALLY be worth it, and I think I can put up with you. LOL
 
Dude - we're not moving that way LOL! Way too expensive for me. My in-laws live there; we'll be there for Christmas break. :)

That being said, 45 minutes one way for some CHEAP (hopefully?) 4Runner parts would TOTALLY be worth it, and I think I can put up with you. LOL

Ahhh I see, totally misunderstood our whole conversation haha, completely thought you were moving to Mechanicsville hahah. My fault, but yeah most of the time things are priced well. Yeah shoot me a pm when you're out this way for Christmas.

Some things I've bought from them:
1999 LTD PWR Leather seats front, rear and rear carpet: $300
Rear deflector: $30
Tundra 13we 199mm brakes: $100
99 Center Console: $30
Clock: $25
Rear Cargo cover: $30

I got quoted these prices:
99-up head lights:$55-65 a piece
01-up tail lights: $55-65 a piece
All wood grain trim (no switches): $50
Grille:$75
Tundra TRD struts:$120

The stuff I bought I thought were good prices and the stuff that I got "quoted" I thought was a little expensive for used stuff; except for the struts, I thought they were a little high but reasonable.
 
Last edited:
When are you going to get the new hood on? I located one 4 hours away from my home.

You can get the muffler from your favorite yard too!

I see the park brake handle is right in the center in your 98 console. How did you manage to put the 99 console since its opening for the park brake handle is towards the passenger seat.

Why you need a template to install the 99 console?

I think you have too much trans. oil.

You can buy 99 and up multi reflector head lamps on ebay. I think a pair is about 70.
http://www.ebay.com/itm/New-Drivers...its=Model:4Runner&hash=item35c0030e78&vxp=mtr

If you need wood grain trim (OEM) for the switches I have an extra set let me know
 
Last edited:
Ahhh I see, totally misunderstood our whole conversation haha, completely thought you were moving to Mechanicsville hahah.

No biggie - though we do come there pretty much every Christmas. Might be a neat way to see how our builds progress. :)

My fault, but yeah most of the time things are priced well. Yeah shoot me a pm when you're out this way for Christmas.

Will do. :)
 
When are you going to get the new hood on? I located one 4 hours away from my home.

You can get the muffler from your favorite yard too!

I see the park brake handle is right in the center in your 98 console. How did you manage to put the 99 console since its opening for the park brake handle is towards the passenger seat.

Why you need a template to install the 99 console?

I think you have too much trans. oil.

I'm not quite sure yet when I'll be getting it painted, most likely late Dec or early Jan. I'm still trying to get the 01-02 grille because I want to color match that along with the front and rear bumpers, not a fan of the chrome.
Haha I know right, I think I'll be going with a completely new system like the flowmaster 40 or 50 series. Give it a little growl.
On the 98 like you said it's in the center of the console so you have to take the e-brake tub/bracket, slide it over and tap a new mounting hole. I needed the template because on the bottom half of the consoles are different and don't have the same "lines" so they just needed a little trimming. Here's a link that'll probably explain it a little better 4Runners.org - The "Cupholder" Mod

I'll check into that trans oil idea, thanks man appreciate the input!
 
You can buy 99 and up multi reflector head lamps on ebay. I think a pair is about 70.
New Drivers Headlight Headlamp Assembly SAE and Dot Stamped 99 02 Toyota 4Runner | eBay

If you need wood grain trim (OEM) for the switches I have an extra set let me know

Thanks for the link, that's the route I'll probably go...ebay. I saw some brand new OE style light with glass lenses for $79 shipped and a brand new 01-02 OE grille for $75 shipped as well. I'll have to let my buddy know about your wood grain because he was the one wanting them, he has the black trim. I'll let him know and get back to you, thank man.
 

Members online

Forum statistics

Threads
278,309
Messages
3,554,071
Members
248,016
Latest member
Advally Service

Trending content

Back
Top