Heater water valve left me stuck!

bwallick

Junior Member
I bought a 2000 SR5 with high mileage and spent a lot of money, time and effort to make it reliable. Everything from seals and bearings to a diff breather. I read all the threads about problem areas and thought it was near-bulletproof after all my work. But the other day one of the nipples broke off the heater water valve on the firewall and dumped all my coolant. I had lots of water and tried to limp home, but eventually it overheated, started pinging and gave me a CEL. I was only 34 miles from home but the tow still cost me almost $500. And now the engine is pumping bubbles out the radiator and the coolant is contaminated. I'm working to pull the heads and hopefully there are no cracks. This could really get expensive due to machining possible head warpage, or cracks requiring replacement heads.

So I want to share my story so that others will not be caught out by this defect in waiting. The valve body is plastic and it will break at some point. Mine just disintegrated. With a pressurized system it's hard to plug. I should have just stopped, but better yet, I should have just replaced the darn thing when I was doing everything else.
IMG_4417.jpeg
IMG_4424.jpeg
IMG_4425.jpeg
 
Register to hide this ad
This is a known "it will break its plastic and hot coolant issue" So keeping a spare or a 1/2 nipple to join the lines is a good idea so you can drive home, or just wait for the tow truck to avoid engine damage.
 

Members online

Forum statistics

Threads
278,493
Messages
3,551,631
Members
248,193
Latest member
erinobr2000
Back
Top