How to change bulbs of T4R Limited running boards

[jvdanek]

My manual doesn't show how to replace bulds on my T4R Ltd running Boards.

 

[williamZ]

You just access them from underneath, rotate the light socket counter-clockwise and pull out. Replace bulb and re-install.

 

[ALLEGRO]

It is just a typical 194 bulb and socket setup.

 

[Uneek]

The bulbs go in at a slight angle rather than straight. I find it easier to get the bulb socket back into the running board laying down.

 

[Eastcoastrunner]

anyone know if there is a specific fuse that lights these running boards? all four of mine do not come on, and there I tried replacing a bulb with a new one today, and still nothing.

 

[Uneek]

I don't recall the name/label for that fuse. It's a 10A fuse in the fuse block behind the battery under the hood. That fuse supplies power to the dome lights and tripometer, maybe some other additional circuits.

 

[Eastcoastrunner]

update: after crawling a little under the runner, i noticed that one side had the wiring cut (passenger side) and the driver side looks pretty dirty. This is getting weird.
Bought the runner a few months ago, and it needed a little TLC as far as I know. Everything else works in the truck, dome light/trip/interior lights