So, in order to do a the HVAC controls and LCD info panel in white, what would need to be purchased from here?
https://www.superbrightleds.com/mor...-instrument-panel-led/220/#/tab/Photos&Videos
Any update regarding this?
So, in order to do a the HVAC controls and LCD info panel in white, what would need to be purchased from here?
https://www.superbrightleds.com/mor...-instrument-panel-led/220/#/tab/Photos&Videos
I hate to resurrect and old thread but I'm having a similar experience. Had a light out, purchased new ones from the superbrightleds and replaced them. Neither light worked, put the old one that had worked before back in and now it doesn't work. The Reset, Mode and Airbag lights all still work but the display does not. Curious if anyone had any ideas?I had one of the two bulbs out on the info display so I pulled it apart and looked for any obvious issues, unseated etc.. After a visual inspection, I put them both back in. Now both are out. I checked the voltage on the circuit board itself (where the bulb socket actually seats) and I read about 6.5 volts. Is this correct?
I don't mind trying the radio shack route and purchasing two bulbs and threading the sockets myself but after watching the YouTube video in this thread, it looks like I should be seeing 12 volts on the circuit board.
Can anyone confirm?
Thanks!
I hate to resurrect and old thread but I'm having a similar experience. Had a light out, purchased new ones from the superbrightleds and replaced them. Neither light worked, put the old one that had worked before back in and now it doesn't work. The Reset, Mode and Airbag lights all still work but the display does not. Curious if anyone had any ideas?
Has anyone replaced just the LED window part 81942A? Mine is badly scratched up from the previous owner. I wondered how ez it is to separate from the module.
So, in order to do a the HVAC controls and LCD info panel in white, what would need to be purchased from here?
NEOx LED Bulb - High Power Instrument Panel LED | Super Bright LEDs
Has anyone replaced just the LED window part 81942A? Mine is badly scratched up from the previous owner. I wondered how ez it is to separate from the module.
Just do this.
Do you have the bulb sizes, for this? I love it! Also, where did you order from? Thanks!
I am attempting to specifically identify LED replacements for the OEM incandescent bulbs in the climate control panel in a 2007 Toyota 4Runner SR5. Attached photo reflects those OEM bulbs and bulb numbers.
I've seen in other posts that the Samsung 5630(t4); 5630(t3); and 5628(t3) bulbs will work but details are lacking on specific sources and specifically which of these bulbs replace which of the OEM incandescent bulbs.
Also, when trying to identify LEDs, I don't see addressed anywhere the varying height/length of the bulbs.
Finally, I have scoured internet sources and the 5628 is not to be found anywhere. Can someone identify where the 5628 can be purchased? Or is this supposed to be 3528 instead?
In summary, I just need very specific LED identities (item or part #) and sources for each of the bulbs in the climate control panel:
90010-09015
90010-09016
90010-09017
90010-09018
90010-09019
Can someone assist with this detail? Much thanks!