I'm about to break everything in sight.

[Dirtyfingers]

I just keep getting more and more pissed off about these leaking valve cover gaskets. Only to find out that three of the bolds have been broken off. What can I do before I set something on fire?

 

[Quatre Coureur]

Change the name to 'Unlucky Red'...?:noidea:

 

[541joseph]

You can go to the store get a reversed drill bit smaller then the bolt and drill them out get a screw driver and try and get it out. And then go buy some new ones.

 

[Scotty_h]

Pull the valve covers completely, see how far down they've broken off and get after it, :lightsaber:

 

[BrianSD_42]

Getting the bolts out will be a pain in the @ss for sure.

Do you have the tools?

 

[Robb235]

Without going outside in the rain to look under my own hood, do you have enough space to get a drill at the broken off bolts?

 

[awpsome]

I hope they aren't the bolts in the back of the motor

 

[Dirtyfingers]

Got them off. Put the cover back on. Starting a new thread.

 

[nobb]

Interested in knowing what worked for getting those out.

 

[Dirtyfingers]

I took a center punch and used a hammer to basically creep it out of the hole...

 

[JohnsD90]

I took a center punch and used a hammer to basically creep it out of the hole...

Nice, thats my first course of action in a situation like this, glad you didnt need to drill it out.

 

[MStudt]

I just keep getting more and more pissed off about these leaking valve cover gaskets. Only to find out that three of the bolds have been broken off. What can I do before I set something on fire?

First and foremost, get a fire extinguisher. :flamethrwoer2: