raers
New member
When I bought my '91 4Runner, I noticed the dome lights never came on unless switched to the on position...but...if you switch either the front or back dome light to the "door" mode, they never turn off. I'm wondering why is there always voltage to that circuit (even when all the doors are closed) and where to start testing?
Here's what I know. I have an SR5 with no map light just one dome light above the back seats and one above the tailgate in the back. Each light works fine except for not turning off when in door mode. I checked the connectors and there is always voltage on both leads. The two courtesy lights in the front doors work perfectly. I've checked each door courtesy switch by pushing them in and seeing that the door courtesy lights work normally. I've stared at the wiring diagram and can't figure out what's going on. I don't know what the integration relay is or where it is. Any help would be greatly appreciated. Thanks.
Here's what I know. I have an SR5 with no map light just one dome light above the back seats and one above the tailgate in the back. Each light works fine except for not turning off when in door mode. I checked the connectors and there is always voltage on both leads. The two courtesy lights in the front doors work perfectly. I've checked each door courtesy switch by pushing them in and seeing that the door courtesy lights work normally. I've stared at the wiring diagram and can't figure out what's going on. I don't know what the integration relay is or where it is. Any help would be greatly appreciated. Thanks.