Knock Sensor Harness Part Number

[TXRick]

I've been looking for the part number for the knock sensor wiring harness. Any help?

 

[rideexileex]

I believe it is this one:
82219A WIRE, SENSOR **219-34010

Page 3 - 2000 Toyota 4Runner 82-02 Wiring & Clamp Parts

Click more info for illustration

 

[rideexileex]

From my own experience, I would definitely follow the FSM and rewire the sensors, to verify its the harness for sure, and not the sensors themselves.

To me it would seem very rare, but I had a simultaneous sensor and harness failure.

 

[txbonds]

I've been looking for the part number for the knock sensor wiring harness. Any help?

According to this it's 82219-34010

Genuine Toyota Knock Sensor Wire Tacoma 4Runner Tundra Tacoma 82219 34010 | eBay

 

[TXRick]

I pulled the codes and it reads both knock sensors are out. I'm hoping it's just the harness. I'll test both sensors but can't really swing $300 right now for parts.

 

[TXRick]

Thanks for the quick reply. I'll get it ordered quick.

 

[rideexileex]

Good luck with the fix! Preventing the engine wire harness housing from breaking is the worst part... go verrrryyyy slow with it.

Some of the rear bolts on the covers and the fuel rails are a pain to access as well - have a few universal/wobbly joints and extensions handy.